Oy Naukri

India Jobs. Read. Talk. Share.

Home > BEML

BEML Recruitment Notification

BEML Limited, India
website: http://www.bemlindia.com/

BEML Limited (formerly Bharat Earth Movers Limited) was established in May 1964 as a Public Sector Undertaking for manufacture of Rail Coaches & Spare Parts and Mining Equipment at its Bangalore Complex. The Company ha s partially disinvested and presently Government of India owns 54 percent of total equity and rest 46 percent is held by Public, Financial institutions, Foreign Institutional Investors, Banks and Employees.

BEML Limited, India - Careers, Recruitment Notice - www.bemlindia.com

If you are looking for employment opportunities with the Company, Visit Career section of BEML India website www.bemlindia.com for current job openings and all recruitment related notifications including exam dates and selection results.

http://76.74.250.14/beml_nr/redirect.aspx

Advertisement

Discussion Board89 comments

Re: maint.. engg

Posted by jaiveer jangra, (2013-01-19 13:37:36) /1.187.181.108

CURRICULUM VITAE
JAIVEER SINGH
V.P.O Mandi, Tehsil: Israna,Distt:Panipat-132103 (Haryana)
Mobile: +91- 9416006008,9013866887
Email: jaiveer_gsk@yahoo.com

CAREER OBJECTIVE
To contribute in a mutually worthwhile manner to your organization at a position commensurate to my skills & expertise.

JOB PROFILE

1 Presently Working as a SHIFT INCHARGE in FINISHING SECTION of the Hot Rolling Department. Current job responsibility is to act as a Maintenance Engineer engaged in improvement activities like “TPM” ,“Six Sigma”, ISO 9001-2000,”and OHSAS of HOT ROLLING Division from Aug 2010 to TILL DATE
COMPANY PROFILE

Jindal Stainless Limited is the flagship of Jindal group. JSL is ISO:9001, ISO:14001 and OHSAS:18001 certified unit having annual Melting and Hot Rolling capacity of 6Lac MT. JSL is India’s largest integrated manufacturer of international quality stainless steel products in various grades. The product range includes stainless steel Slabs and Blooms, Hot Rolled Coils, Plates and Cold Rolled Coils/ Sheets.

JOB RESPONSIBILITY

Working as SHIFT INCHARGE in Electronics Deptt. at STK MILL FINISHING SECTION contains four areas of MECHANICAL & HYDRAULIC EQUIPMENTS : ANNEALING SECTION, PICLING SECTION, SLITTING SECTION as shift incharge
1 Ensuring efficient operation of FINISHING SECTION.
2 To organise. Preventive maintenance & predictive maintenance of the equipment contains opretive maintenance, non-opretive maintenance & time based maintenance.
3 To attend breakdown maintenance to reduce the delay time.
4 To contribute in T.P.M & 5S ACTIVITIES in the plants.
5 To under-contact with other department such as OPERATION, ELECTRICAL,WORKSHOP,PROJECT, STORE for proper flow of maintenance activities.
6 Maintain & well storage of all SPARE PARTS & planning of Planned Maintenance.
7 Motivated & controlling the manpower for minimizing breakdowns.
8 Responsible for managing shift operational activities of Hot Rolling by coordinating with various deptt. i.e. Electrical, Mechanical maintenance etc & to meet the production targets of Hot Rolling deptt.
9 Responsible for managing & coordinating with shift manpower for achieving best results.

EDUCATIONAL QUALIFICATONS

Degree Board/University Year of Passing Percentage Marks
DIPLOMA(ECE) S.T.B.E.CHANDIGARH 2010 67.20
I.T.I D.I.T.V.E. HARYANA 2007 77.57
10+2 H.B.S.E. BHIWANI 2005 61
MATRIC H.B.S.E. BHIWANI 2003 61

Personal Details
Gender :Male
Date of Birth :20/07/1986
Languages Known : Hindi,English
Marital Status : Single
Passport :Yes
Declaration

I hereby declare that the above particulars are true to the best of my knowledge.

Signature jaiveersingh

Re: Require a job in beml, SEZ as a production engineer/incharge in the field of aircraft structure assembly or detail sheet metal parts production

Posted by Santhosh BG, (2012-05-24 16:38:59) /202.60.62.100

Hi i am Santhosh BG currently working in technical publication(aerospace) field with an overall experience of 9 years, 8 months.
I wanted to change my field to aerospace production field which is my previous job.
I am having an experience of 5years in the field of aircraft structure assembly or detail sheet metal parts production.
So, whenever an opportunity comes, please give me a chance to work in your firm. Below are my details with contacts:

PROFESSIONAL QUALIFICATION:

B.E. Mechanical (First Class with Distinction): With aggregate of 63.7%

PRESENT JOB PROFILE:

 Working as Technical Author (Bombardier Project) in Capgemini Consulting India Pvt Ltd, from 14th September 2007 to till date.

Skill Summary
 Results-driven professional with overall 9.5 years of experience.
 4.5 years of experience in the field of Technical Publication.
 Strong experience in understanding the customer requirements, Estimation of efforts, and Standard Creation (Creation of template and standards).
 Good experience in reading & understanding Engineering drawings.


PREVIOUS EXPERIENCE:

I. DYNAMATIC TECHNOLOGIES LIMITED,PEENYA (AEROSPACE)

Position: Shop Engineer (Aircraft structural Assembly and sheet metal)
Experience: Since May 2005 to September 2007

NATURE OF JOB AND KEY RESPONSIBILITIES:

 Shop supervision by providing technical support and clarifying the technical problems, it also includes follow-up of jobs stage wise using online networks and procurement of standard and non-standard parts that are Fabricated in shop floor as well as imported items.
 Rectification of deviation occurred while detail parts manufacturing by interpretation of drawings using CAD Models and blue prints.

 Planning and monitoring the targets as per timing activity chart and ensuring that all projects are executed within the stipulated time frame.
 To take the trail production of detail parts and proving out.
 Ensure quality during the each stage of part manufacturing in in-house.
 Freezing of manufacturing method by taking trail production and prove out.
 Involved in the interpretation of detail part (sheet metal) drawings from CAD tools and provided technologies on SUKHOI project such as Canard, Ventral Fin, Stabilizer and Slat assembly.
 Involved in the interpretation of detail parts (sheet metal) of Advanced Light Helicopter (ALH) drawings and having knowledge regarding the processes required for the making of the sheet metal parts.
 Specifically working on stabilizer assembly (prototype) and on successful completion, delivered the first component recently.

II. HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION.BANGALORE

- Position: Shop Engineer (aircraft structural Assembly)
Experience: Since September 2002 to May 2005.

NATURE OF JOB AND KEY RESPONSIBILITIES:

 Shop supervision by providing technical support and clarifying the technical problems to various departments related to them. It also includes follow-up of jobs stage wise using online networks and procurement of standard and non-standard parts that are fabricated in shop floor as well as imported items.

 Troubleshooting the quality problems during all stages of assembly.

 Ensure quality during the each stage of assembly.

 Rectification of deviation occurred while assembly by interpretation of drawings using CAD Models and blue prints and also follow-up of parts that are required for one particular stage by using Electronic Data Master and solve troubleshooting parts to produce without ambiguity.

 Taken active part in the field of assembly using various techniques such as cold working, spacematic drilling etc., and also taking control of meeting the quality standards.

 Totally, worked in Jaguar project of 17 Trainer Aircrafts (Wing and Defined structural assemblies & also in fuel leakage rectifications).

PERSONAL DETAILS:

 Father’s Name : B.H. GURUBASAPPA

 Date of Birth, Age : 02-08-1980, 31 years

 Languages known : Kannada, Hindi, English, Telugu & Tamil.
To speak

DECLARATION:

I, the undersigned hereby declare that the above information by me are true and correct.


(B.G. SANTHOSH)

DATE: / /2012
PLACE: Bangalore
B.G. SANTHOSH B.E. Mechanical,
#466, BETTAHALSUR POST, NEAR PRIMARY HEALTH CENTER,
JALA HOBLI, B’LORE NORTH,
PIN CODE – 562157

E-Mail: sgurubasappa@yahoo.com, santybg@yahoo.com

Official E-Mail: santhosh.gb@capgemini.com
Contact No. : 9880928613

Re: Sir/Madam I introduce myself as M.Nisar Ahmed, graduated in Bsc Computer and pursued my masters in business administration with specialization marketing and systems. My piece of work for the summer project titled

Posted by job application, (2011-07-26 19:31:20) /202.133.60.130

M.NISAR AHMED
Mobile: +91- 9866670832 Tel: 040-66822932 ~ E-Mail: nisar_sms@yahoo.com

Seeking senior to top level positions to head Centre Operations, Sales & Marketing, Business Development with a reputed organisation

PROFESSIONAL PROFILE
Chronicled success of over 5 years in Business Development, Sales & Marketing and Customer Relationship Management in the furniture & interior solutions industry.
Significant exposure to project execution, attainment of profit targets, promotion of products & services, channel management and achievement of business goals.
Formulating plans & policies to foster customer relationship management, administration, finalisation of strategic alliances, market analysis/ intelligence, and development & pricing of products based on market/ customer specifications.
Well organised with a successful track record that demonstrates self-motivation, entrepreneurial ability, creativity, and initiative to achieve corporate goals.
Resourceful in developing & managing the dealer network, setting up infrastructure, resulting in greater market penetration and reach.
Effective management - market mapping, prioritizing opportunities, facilitating proper training & development of individuals, channel partners in terms of product knowledge, etc.

CORE STRENGTHS (Loyal&Hardworking, Good Communication Skills, Open to new ideas and challenges, Interpersonal Skills,)
Business Development: Identification and successful coverage of list of customers for the given segments to manage existing customers as well as generate and convert new accounts. Successful attainment of Rate Contract with accounts like NMDC, BHEL. Developed healthy relations with key accounts and other influencers of decision making for facility requirements in the industry.
Sales & Marketing: Experience of both Project & Retail selling - Established products as well as new product ranges to experts ranging from PSU’s, BFSI, Pharma & Health care, and Corporate & SME’s. Bagged breakthrough orders from clients that are new to dealing with Godrej. Achieved the ‘Best Branch’ for Lab business at national level for 2007-08. Bagged a few of prestigious orders for various product ranges that are now used as referral sites across India.
Key Account Management: Developed new key accounts as well as managed all key accounts effectively with timely resolution of problems, regular servicing of products, and best response time to queries etc. The Customer satisfaction index has seen a rise and has been satisfactory.
Channel Management: Imparted product training to sales team of all dealers on a quarterly basis & effectively guided them to reach to the target segment of new product lines (Lab solutions) apart from the standard products, generation of business from both tapped and untapped through extensive coverage of market for the given segment. Share of business generation through dealers has increased resulting into greater business confidence of these dealers, better working capital management for the company and enhanced visibility in the industry.
Branding: Active participation in some major events like Facility Managers meets, Industrial Expo etc. Effective use of such events and concepts like Ergo-check, solutions to showcase the capabilities and pioneering initiatives of the organization in the field of Health seating, effective space management etc.

EMPLOYMENT HISTORY:

Appliance Division of Sujana Universal Industries Ltd. Since April’06 Total Exp: 6Months
Locations covered: Hyderabad.

Growth path
April’06 - Sep’06 Sales Officer, Hyderabad

Interio Division of Godrej & Boyce Mfg. Co. Ltd. Since Oct’06 Total Exp: 4Years 9Months
Locations covered: Hyderabad & other parts of Andhra Pradesh.

Growth path
Oct’06 - May’10 Senior Sales Officer, Hyderabad
June’10 Onwards Assistant Manager: Institutional Sales & Business Development, Hyderabad
April1st 2011 Deputy Manager:Institutional Sales & Business Development,Hyderabad

Responsibilities;
Managing entire gamut of activities covering: Sales Management, Business Development, Channel Development & Management, Working Capital management & other activities.
Manage sales, relationship building – For segments Public Sectors, Corporates, Pharma & Health care, BFSI, Semi-Govt.companies apart from the channel partners
Planning and developing strategies in consultation with superiors to improve efficiency and achieve the desired results
Additional responsibility – Territory Sales In-charge for the two COCO stores (Company owned)
Ensuring smooth flow of all necessary technical & commercial activities for effective Working Capital Management.
Liaison with back office and warehouse for smooth flow of activities for effective management
Ensuring prompt resolution to problems faced by customers.

Major Accomplishments
Played a key role in achieving breakthrough bulk orders for Interio Range of products, Sunrise Business lines (Laboratory Solutions)
Successful attainment of Rate contract agreement with BHEL, NMDC accounts with business potential worth 30Cr
Actively involved in developing Sunrise Business lines in a record time.
Received awards / recognition for Best Branch for Lab furniture for 2007-08 at National level.
Received awards / recognition “Interio Samman” at Branch level for attainment of Rate Contract agreement with NMDC with order of more than 100lacs same year for 2009-10.

ACADEMIC PROJECT:
Ultratech Cements Ltd, Hyderabad 2005
Project done for the partial fulfilment of MBA degree, deals with brand preferences of dealers, to analyze how the dealers prefer a particular brand; market research for brand awareness
Presented several recommendations for ULTRATECH and its dealers for product positioning.

ACADEMIC PROFILE:
2003-05 MBA: Marketing & Systems : Shadan Institute of Management Studies, Hyderabad : secured First Division with 64.6%
2000-03 Bsc : MPCS : Shadan Degree College, Hyderabad : secured First Division with 66%
1998-00 BIE : Vijaya Nagar Junior College, Hyderabad : secured First Division with 63.5%
1997-98 SSC : Green Gates Grammar School, Hyderabad : secured First Division with 61.6%

EXTRAMURAL ACTIVITY
Responsible for organizing various cultural activities (school ,college level)
Took part in various essay writing, elocution & other competitions at social platforms.
Active participation in Event Management (College Festival ‘MANIA -04’)
Indulged in Social Activities: Took part in creating awareness and assistance in raising funds for the help of elderly people (HELP AGE INDIA).

PERSONAL DETAILS
Date of Birth: July 1, 1983
Languages Known: English, Hindi, Telugu
Address: 12-2-830/22/1, 204, Kaveri Enclave, Alapati Nagar, Mehdipatnam, Hyderabad - 500028

Re:

Posted by asd, (2011-05-10 19:35:28) /122.167.154.16

I completed my bachelor degree in govt: college chittur in the year 2004

Re: Sub:Request letter to HR dept:for suitable job.

Posted by PRADEEP.NR, (2011-05-06 19:25:26) /122.167.153.198

Respected sir/madam;
I Pradeep.NR working as Fire technician in Bangalore international Airport in (ARFF) dept:since 2008.I have also worked as security officer in Airlines field(indigo)BLR I am basically in Palakkad(dist)chittur.My contact no:07829968002,Email id:pradeep.nr@bialairport.com,pradeep.rajan1981@rediffmail.com

Re: Request letter to HR department for suitable job:

Posted by Pradeep.NR, (2011-05-06 19:00:48) /122.167.153.198

Dear sir/madam;

I Pradeep.nr working as fire technician in Bangalore international Airport since -2008.I completed Basic Fire training course under (AAI)in New Delhi, and i have more than 2 years in Airlines field as Security officer.I completed Basic Aviation security course in Mumbai and also completed X-ray screeners course in Chennai international Airport.

Re: MOHD SHAKEEL

Posted by MOHD SHAKEEL, (2011-03-12 11:06:47) /220.225.17.46

Re: want to settle in public sector

Posted by shakeel, (2011-01-30 12:25:24) /14.96.84.122
MOHD SHAKEEL
Contact No: 9704696542
E mail: shakeel.mhmmd@gmail.com
ADDRESS:
MOHD SHAKEEL
H.No: 2-139,
Arutla (V),
Manchal (M),
Ranga Reddy (D),
Pin 50158
CAREER OBJECTIVE:
To become a good management professional
PROFILE:
• Ability to prioritize delegate tasks and make sound decision.
• Versatile and flexible in nature can adaptable to any organizational changes when protocol demands.
• Holding good communication and public-relation skills and can reciprocate positively towards the work.
TECHNICAL SKILLS:
Software skills:
• Operating systems: Windows VISTA, Linux. Database: MS-Office, DTP
EXPERIENCE:
• Have worked as sales officer in HDFC bank Hyderabad.
• Have four years experience in teaching.
STRENGTHS:
• Honesty, Punctuality, Sincerity, enthusiastic in learning new things carefully and perfectly, accepting criticism, hard working and helping nature.
ACHIEVEMENTS:
• Have achieved first rank and best student award in B.Sc.
• Have achieved School Second Rank in S.S.C.
• Have achieved first prize in essay writing competition in S.S.C
CO-CURRICULAR ACTIVITIES:
• Have worked as school pupil leader in S.S.C.
• Have worked as student organization president in Inter and B.Sc.
• Have worked as “Entertainment Club” president in M.B.A

EDUCATION:
Examination Discipline/Specialization School/ College Board/University Year of pass
M.B.A Marketing And H.R. Nalla Malla Reddy Engg.College J.N.T.U. 2010
B.Sc Life sciences
(B.Z.C) Ibrahim Patan Degree College Osmania University 2005
Intermediate Botany, Zoology, Physics, chemistry Pratibha Junior college Board of Intermediate Education 2001
S.S.C S.S.C Z.P.H.S Arutla Board of Secondary Education 1999
TRAINING AND CERTIFICATIONS:
• Have communication skills training by experts in NMREC in MBA.
• Successfully completed diploma in English in Rama Krishna math Hyderabad.
PERSONAL PROFILE:
Name: Mr Mohd Shakeel
Father’s Name: Mr Shabbeer
Mother’s Name: Mrs Qaisar
Date of birth: 03-08-1983
Sex: Male
Marital status: Unmarried
Nationality: Indian
Hobby: Browsing computer and chatting with friends.
Language proficiency: Telugu, Hindi, English
Permanent Address:
H.No: 2-139,
Arutla (V),
Manchal (M),
Ranga Reddy (D),
Pin 50158
Andhra Pradesh.
DECLARATION:
I here by declare that all the above mentioned information is correct to the best of my knowledge.

Place:
Date: (MOHD SHAKEEL)

Re: Job

Posted by Avinash G, (2011-01-29 16:22:41) /122.166.45.247
RESUME

AVINASH.G
#105, 1st main, 1st cross,
Kothanur, J P nagar 8th phase, PH: 080-26850050, 9886852212
Bangalore-560076 Email ID : avireddy12@yahoo.in

OBJECTIVE

To obtain a challenging and responsible position in the organization and to contribute effectively to the success of the organization and further improve my personal skills.

STRENGTHS

 Ability to handle complex situation in simplified manner.
 Ability and desire to learn and adapt to new technologies.
 To maintain a positive attitude always while with the team and organization.

ACADAMIC CREDENTIALS

COURSE

BRANCH
YEAR OF PASSING
INSTITUTE AGGREGATE PERCENTAGE
Bachelor of Engineering Mechanical Engineering
May 2010 Vemena institute of technology, Bangalore-19
72% FCD
PUC PCMB April 2006 BHSFGC, Jayanagar, Bangalore
52%
SSLC NA March 2004 B.M.E.S, Jayanagar

68%

PROJECT

 Fabrication of solar refrigerator using activated carbon and methanol

DESIGN SOFTWARE KNOWN
 Solid edge
 Catia v5

ACHIEVEMENTS

EXPERIENCE:
Presently working as PRODUCTION ENGINEER in an Mechanical Industry called EXCEL WIRECUT.INC since 6 months. Manufacturer of precision Mechanical Components like Adaptor, Endcap & Piston of an pneumatic actuator for an MNC called FLOWSERVE INDIA PVT LTD, WHITE FIELD, BANGALORE.

PERSONAL DETAILS
PERSONAL INFORMATION:
Name Avinash.G
Father’s name Gopal reddy.R
Date Of Birth 12th October 1988
Languages Known
To speak
To read
To write

English, Telugu, Kannada
English, Kannada, Hindi,
English, Kannada, Hindi

Marital Status Single
Address #105, 1st main, 1st cross, Kothanur, J P nagar 8th phase, Bangalore-560076
Hobbies Playing cricket.
Contact Number: Mobile – 9886852212

DECLARATION:

I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Date:
Place: Bengaluru Avinash.G

Re: looking for Assistant Security Officer

Posted by NARAYANAN.K, (2011-01-10 12:10:48) /59.92.251.192
Sir, My name is Narayanan.K retired from Paramilitary service in the rank of J.C.O during last year 2009 after completion of 23 years service...have passed SSLC from Calicut niversity (Kerala) and ahving one year experiense as a Security supervisor at TYCO fire and Security Film City G.Noida (U.P) and presently working at Hindustan Petrolium Corporation ltd (Bottling Plant) at Kattipalla (Mangalore) as a Security Head Guard
E_mail Karimbannarayanan@yahoo.in
Contact number 09483804544 (Karnataka)
09847012895
Father's name Choolan.K
Address "PRATHYSASA"
Devathiyal Parambil house
Thenhippalam (Post & Village)
Malapuram ( District)
Kerala-673636
Marital Status Married
Height 181 Cms
Language known
English,Hindi,Malayalam,Kannada
Drving license LMV,HPMV.HGMV with badge

I Narayanan.K is hereb by declare that the above mentioned information is true to the best of my knowledge and belief and awaiting for your favorable reply

Thanks & Best Regards
Narayanan.K

Re: Application for the post of Assistant Security Officer

Posted by Santosh Navale, (2011-01-06 13:45:25) /59.164.102.75
I have Completed B.A, & I have 2 years Experince in Clerk & 5 years of expereince in PROGRESSIVE CIVIL CONSTRUCTION CO. (P) LTD, I also done my Diploma in Computer.

kindly contact me on : 9242085689
awaiting for your reply

Re: safetyofficer

Posted by Sudhanshu Kushwaha, (2011-01-04 19:36:41) /27.58.73.176
I am B.sc.&Advance Diploma In Fire Safety Eng. to complet for job to the company ESSAR STEEL LTD. HAZIRA

Re: Job request for any technical post,freshers

Posted by Dibyendu Mondal, (2010-12-28 23:46:05) /110.227.136.251
Dear sir/madam,
I am Diploma in Mechanical engineering,69%,2010.When any job vacancy please contact me.

Thanks...

Re: heavy auto elecritian

Posted by vineshkumars, (2010-12-23 12:52:46) /117.204.104.118
ive been working in a private firm as heavy auto elecrician almost 10 years

Re: CV

Posted by Partha Dey, (2010-11-26 13:58:41) /59.162.204.213
CURRICULUM VITEA
ppdey2@gmail.com
Mobile 9052360946
PARTHA DEY
Career objective

Passion to success in my chosen field through continuous learning and innovation and give value to acquired knowledge by putting strategies for development of self and the organization
Achievements

• Participated in various management meets Astra, Virat.
• Participated in School Quiz.
• Represent our School cricket team as captain.
• Represent our district in U19 cricket tournament.
• Participate in some drawing competition in our home town.

Capabilities
Communication:
• Learned to seek and accept criticism, using this in a positive manner to further build on my skills.
• Understand that good communication is vital to a successful organization

Academic Qualification

• Doing Bachelor of Business Management (BBM) final year from Gayatri Vidya Parishad (Visakhapatnam).
• Passed 10+2 from WBCHSE, West Bengal with an aggregate of 50% in 2008.
• Passed Inter from WBBSE with an aggregate of 50% in 2006.

Projects handled
• 1 month project done in ‘Tata Metaliks Ltd’, Kharagpur, Dist-Midnapur (west) on Employees Motivation.
Technical qualifications
• Package M.S office.
• Data Processing: M.S.DOS.
• Having basic internet concepts.
Hobbies

• Playing cricket
• Watching TV
• Reading my mother tongue novels
• Riding Bike
• Chatting with friends.
• Participating in social activities

Personal Details

Fathers Name : Goutam Dey
Date of Birth : 15-09-1989
Gender : Male
Marital Status : Single
Languages Known: English, Bengali, and Hindi.
Nationality : Indian
Native Place : Inda, Kharagpur.Dist-Midnapur (west).
Address for communication: Partha Dey
c/o Goutam Dey
Inda, Malibagan, PO-Inda.Pin-721305
Kharagpur, Dist-Midnapur (west).

I declare that above furnished information is best of my knowledge and true

PARTHA DEY

Re: job

Posted by ajeesh.k, (2010-11-23 11:58:19) /210.212.236.227
sir iam 6mounth back one application sent for techanician fitter; no replay

Re: MY DREAM CAREER IN BEML

Posted by TIJU S, (2010-11-11 11:01:26) /202.83.56.45
I hav under graduation course in Bachelor of Mathematics (Under Calicut University) I would like to work in your company.Looking for favourable reply from your side,for any suitable posts.
My ADDRESS:TIJU S, S/O KOUSALYA, KURUPPATH HOUSE, KIZHAKKETHARA, KOTTEKKAD(PO), PALAKKAD.PIN-678732, MOBILE NO:9746222604

Re: MY DREAM CAREER IN BEML

Posted by TIJU S, (2010-11-11 10:58:38) /202.83.56.45
I hav under graduation course in Bachelor of Mathematics (Under Calicut University) I would like to work in your company.Looking for favourable reply from your side,for any suitable posts.
My ADDRESS:TIJU S, S/O KOUSALYA, KURUPPATH HOUSE, KIZHAKKETHARA, KOTTEKKAD(PO), PALAKKAD.PIN-678732, MOBILE NO:9746222604

Re: HI good evening sir

Posted by lakshmi pathi.H.V , (2010-10-12 15:42:51) /59.97.33.89
HI sir i'm completing my engg in ece wieh aggre of 62.6 still i'm searching a job if you have any vacancies please mail me

Re: jobs for auto mechanic/instructor & gunman in gujarat

Posted by ADESING BARIA, (2010-09-26 18:29:38) /14.194.45.131
pl.kindly search my various jobs gujarat for above requirements.
my experience is 26 years defence EME (army).suddenly i should be retired in this job.so pl.give me a details of above post.
i have also certificates AUTO TECH PROFICIENCY CERTIFICATE & SECURITY TRAINING CERIFICATE & GRADUATION & ADVANCE COMPUTER COURSE CERTIFICATE. I so far my education is well .pl.give me a chance to the same jobs in gujarat. i fullfill my bio data as per your company.
THANKS & REGARDS,
ADESING M.BARIA (EX.ARMY EME)
(M)9737689892 (GUJARAT)
(M)9638299646 (GUJARAT)

Re: sir,i need a job

Posted by Akash kumar, (2010-09-01 12:49:46) /117.241.242.152
sir,i have completed my diploma in electronics & communication from govt.polytechnic,Bidar. i need a job or training in your beml

Re: aakash_badiger@yahoo.com

Posted by respectd sir,, (2010-09-01 12:44:02) /117.241.242.152
sir,i have completed my diploma in electronics & communication from govt.polytechnic,Bidar. i need a job or training in your beml

Re: I need job for beml

Posted by Shivaraju SL, (2010-08-26 11:49:26) /27.57.39.184
I completed diploma in computer science in SETP Melkote, Mandya Distric, one year technician training in beml bangalore complex. Öne year working in beml erp department i know the hard ware and installation of all kind of software and also lurn sap

Re: 9 Years Experience in electrical maintenance field

Posted by Srihari.V, (2010-08-10 17:07:18) /122.167.54.34
RESUME
Name : Srihari.V
Father's Name : Late Sri K.V.Venkatesha
Date of Birth : 14-05-1975 (35 Years)
Nationality : Indian
Religion : Hindu
Caste : Brahmin (Telugu-Smartha)
Marital Status : Married
Residential Address : # 478, D.Subbaiah Road Chamaraja Mohalla Mysore-570024
Mobile No : 9901424557
Landline No : 0821-2333294
Languages Known : Kannada, English, Hindi & Telugu
Email id : srihari_v53@yahoo.com
srihari_v53@rediffmail.com

Educational Qualification: 1) S.S.L.C-Marimallapa's High School, Mysore. 2) P.U.C (Commerce)-Marimallapa's Junior College, Mysore. 3) Diploma in Electronics & Telecommunication (Course Completed) –Srimath Polytechnic, Mysore
Computer Knowledge: Basics (Word & Excel)
Work Experience:
1) Worked in Neulite Computer Systems, N.R.Mohalla, Mysore.
A Sub Contract Unit for Wipro-e-Pheripharals (Printer Assembly), Hical Magnetics Pvt Ltd (Bangalore)-Transformer Winding

Role: Production Incharge.

Experience: 2 Years.

Responsibility: Taking out the production with Quality and Quantity.

2) Worked in Am-Tech Packs Ltd, Hootagalli Industrial Area, Mysore.
A Can Manufacturing Unit with 100% E.O.U for Beverages.
Role: Senior Technician-Electrical.
Experience: 4 Years+3 Months.
Responsibility: Preventive maintenance of Air Compressors, Diesel Generators. Attending Breakdowns in Compressors, Generators and Press Machines.

3) Worked in Neulite Products Pvt Ltd, Hebbal Industrial Area, Mysore.
A Sub Contract Unit for L&T (Single Phase Digital Meter), Wipro-e-Pheripharals (UPS-PCB Assembly)
Role: Production Supervisor & Electrical Maintenance Incharge.
Experience: 11 Months
Responsibility: Taking out the production with Quality and Quantity, Looking after the Machines like Screen Printing Machines, Pick & Place machine, IC Placement, Reflow Machine.
4) Worked in Vinyas IT Technologies (P) Ltd, Hebbal Industrial Area, Mysore.
A Sub Contract Unit for L&T (Single Phase Digital Meter), BEL etc.

Role: Electrical Maintenance Supervisor.
Experience: 2 years.
Responsibility: Preventive maintenance of Machines like Screen Printing, Pick & Place Machine, IC Placement, Reflow, Air Compressor, Diesel Generators, Wave Soldering.

Re: Hello Sir/Madam, want a job in your company

Posted by Ashok Kumar, (2010-07-25 19:10:56) /117.254.137.8
CURRICULUM VITAE

ASHOK KUMAR. S
Mobile: 9789674597
Department of Engineering: Mechanical Engineering Email ID: ashok4ru@gmail.com

PROFILE:

 Over 1Year of experience in NDT (ASNT Level II).
 Technical Skill set as follows, Auto cad, Pro-E, Quality Control Tools.
 Good knowledge in Codes & Standards like SA388, ASME Sec-V Articles, used for PT/MT/UT.
 Result oriented analytical and conceptual skill, highly motivated and driven team player, Eager to learn new technologies, Honesty, Hardworking, and Believes in deserve than desire.

WORK EXPERIENCE:

Organization : Bit techno crafts, Coimbatore, Tamilnadu.
Designation : Engineer (Quality).
Responsibilities:
 Inspection of the job using NDT methods.
 Good knowledge in Ultrasonic examination of different components.
 Good knowledge in Penetrating Examination of casting.
 Good knowledge in Magnetic Particle and Ultrasonic Examination Knowledge in Safety devices.
 Knowledge in Gauges.
 Handled Ultrasonic testing Equipments such as PX10.
 Documents preparation and maintenance for the Ultrasonic testing of welded joints in pipes.
 Maintaining the equipment history.

INPLANT TRAINING:
Duration : From 15th of June 2006 to 15th of July 2006
Place : FM Yard Mines-I, Neyveli Lignite Corporation, Tamilnadu.
Details : Prepared report on the Mining Machinery and Equipments.

EDUCATIONAL QUALIFICATION:

EDUCATION
BOARD/
UNIVERSITY
INSTITUTE
YEAR OF PASSING
PERCENTAGE OF MARKS

B.E.
(Mechanical Engineering)
Anna University
Vel Tech Engineering College, Chennai
2009
71

12th (HSC)
State Board Jawahar Matric. Hr.Sec. School, Neyveli
2004
80

10th (SSLC)
Matriculation Jawahar Matric. Hr.Sec. School, Neyveli
2002
82

ACADEMIC PROJECT:
Title : ANTICOLLISION DEVICE FOR OFF ROAD VEHICLE
Division : Chennai
Team Size : 4
Duration : 4 Months
Description :
The device used to detect any obstacles behind the vehicle while coming in reverse direction in order to avoid collision very safety device for future vehicles. Detecting an obstacle is a tough task because for an automobile, only while it is in motion, the anti-collision system should detect for obstacles. The safe distance at which an obstacle can be present, should be calculated.
Apart from this, the angle at which the obstacle is present and the direction of travel of the vehicle are important to detect the real obstacle. In the event of detecting an obstacle the system should given an alarm or warning and stop the vehicle.

OTHER SKILLS:
Technical Skills:
 Knowledge on Catia
 Knowledge on ANSYS

Computer Proficiency:
 Operating System : Windows Family
 Packages : Microsoft Office

PERSONAL DETAILS:

Father’s Name : Mr.A.Selvaraj
Date of Birth : 06 - 03 – 1987
Age : 22 Years
Languages Known : English, Tamil, and Hindi.
Hobbies : Listening to the Music, Reading Books
Address : C-21, Thiru vi ka Street
Block-25, Neyveli
Cuddalore – 123401
Tamilnadu

Declaration:
I hereby declare that all the details furnished above are true and unbiased.

Place: Bangalore
Date: (ASHOK KUMAR.S)

Re: Mechanical

Posted by Mahesh.S, (2010-07-20 12:10:23) /122.167.153.194
RESUME

Mahesh S
#220, E.W.S,Hebbal 3rd stage, Subramanyanagar,
Mysore 570016
Mobile: 9964886795
Mail ID: Maheshgowda.S89@gmail.com

Objective:

Seeking a position in an esteemed organization that provides environment for growth, continuous learning and skillful application of my knowledge.

Education:

Degree Certifying Authority Aggregate Percentage Year of passing

BE
(Mechanical)
Visvesvaraya Technological University
74.19%

2010
II PUC
Pre University Board

60.66% 2006
SSLC
Secondary Education Board
59.36% 2004

Software Skills:

• Ansys V11
• Mastercam X3
• Solid edge V19

Projects Undertaken:
I have carried out a project in B.E named “Design of Quenching fixture”. The gears after manufacturing are subjected to carburizing, hardening to improve the hardness. After hardening process gears are subjected to rapid cooling called quenching. In quenching the oil circulated throughout the surface of gear tooth in order to achieve required hardness.
It is found that circulation of oil throughout the bottom face is difficult and also bottom face of the gear is first come in contact with the quenching oil and later the oil is circulate to the other faces of the gear. This results in uneven grain growth throughout the structure. Hence it is necessary to modify the design so that oil should splash in a manner such that it will surround the gear at a time and also uniform oil circulation throughout the gear.
By improving the design of the fixture so that it can accommodate maximum load gear wheels (more than 10tonne).Fixtures are subjected to repeated loading and unloading cycles, this induces residual stresses and hence decreases the life. In order to improve life of the fixture, selecting a suitable metal which is having high strength and less cost than mild steel (presently using).
Finally optimize the cost of the proposed quenching fixture design.

Achievements:

• Topper in 3 semester out of 8 semesters in the class and once in the college .

Papers presented:

• Presented paper on “Advance systems in two wheelers”, Indian society for technical education, HMSIT,Tumkur on 30th of April 2010

Co-Curricular:

• Actively participated in “EKALAVYA 08”, national level technical fest held at Bahubali College of Engineering from 28th to 30th march 08
• Co-ordinated paper presentation and poster presentation competitions organized by ISTE students chapter, Bahubali college of Engineering

Volunteered:

• Social services at NSS camp held at college
• Donated blood at a camp organized by Indian Red Cross Society

Hobbies:

• Meditating
• Gardening

Languages known:

• English
• Kannada

I declare that, the information provided above is true to the best of my knowledge and belief.

Date: 20-07-2010
Place: Mysore Mahesh S

Re: i need job in BEML limited.

Posted by vinuthashree.s, (2010-07-20 11:39:15) /175.40.213.123
I have completed my engineering degree in 2010 in electronics and communication.
i am still searching for a job in any stream in any company.i guareenty that i do my best in any company i work.
RESUME
VINUTHASHREE.S
C/o Narasimhaiah
Behind vishwa shanthi ashram bus stop
Arishinakuntai post
Nelmangla
Bangalore
vinutha.1407@gmail.com
Mobile: 9663929620

CAREER OBJECTIVE
To pursue in an organization, which provides an opportunity to establish my potential in full fledge for the growth of the organization and self.
ACADEMIC INFORMATION

Graduation: Bachelor of Engineering.
Specialization: Electronics & Communication
University: VTU Belgaum
Aggregate Percentage: 54.3%
Year of passing: 2010

Pre University Course: SARVODAYA P.U.College, Tumkur.
Percentage: 66.66%
Passing Year: 2005

S.S.L.C:
School: S.S.R.H.S.S, Tumkur.
Percentage: 87.52%.
Year of passing: 2010

TECHNICAL SKILLS

• Programming Languages: C, Linux.
• Application Suites: MS-Office.

PROJECT DETAILS

Project title: Embedded Widget Design Implementation of TCP/IP Micro Stack for Real-Time Industrial Constraints Monitoring and Control.
Description: In this project we designed the web server circuit board to control the devices or equipment’s from the remote place through a web page. Here all devices are connected to the microcontroller and the devices which are to be controlled are connected to the relays on the web server circuit board. The web-server circuit is connected to LAN or Internet. The client or a person on the PC is also connected to same LAN or Internet. By typing the IP-address of LAN on the web browser, the user gets a web page on screen; this page contains all the information about the status of the devices. The user can also control the devices interfaced to the web server by pressing a button provided in the web page.

PERSONAL AND CONTACT DETAILS

Full Name: Vinuthashree.S
Date of Birth: 14 JULY 1987
Father’s name: Siddaiah.R
Mother’s name: Chandramani
Marital status: single
Languages known: English, Kannada.
Permanent Address: D/o Siddaiah.R
#199 3rd Cross
C.M.Extn. Kyathasandra.
Tumkur-572104
Karnataka.
Contact Details: 9663929620, 9738655475.

I hereby declare that the above-mentioned information is true to the best of my knowledge.

Date: Regards
Place:

(Vinuthashree.S)

Re: iam like to work with ur company

Posted by rittodas thalakkottukara , (2010-07-16 21:44:24) /117.204.102.99
iam in diploma civil engg holder 10 year experience in the feild my address
rittodas thalakkottukara
thalakkottukara house ,
vadadkkethara ,
pudussery,po
palakkad 678623
ph;mob- 9447422802
res491-2566707

Re: for a job

Posted by THUSHAL, (2010-07-06 16:38:51) /111.92.37.69
I am a mechanical engineering diploma holder from Technical board of examination. and also have the diploma in safety engineering, I trying to get a new job in BEML.
now i am working in abroad (abudhabi)
My address : THUSHAL.TU
SREEVALSAM,
MUTTAPALAM (P.O)
THACHODE,
VARKALA,
TRIVANDRUM.695145
ph :04702606914

Re: I wante Application For Jobs

Posted by venugopal.M.S, (2010-07-06 14:56:39) /122.166.47.132
Sir please send my mail application for bemal jobs
Thanking you,

Re: Job Application

Posted by Samna Beagum A, (2010-07-05 15:57:55) /61.1.225.106
Sir,
I have compleated my b.tech in electrical and electronics enggineering under M.G University with an aggrigate of 73.8%(up to 7th sim),and 8th sem result is coming within one month.If there is any vacancy please inform me.

Re: job in beml

Posted by babitha t v, (2010-07-02 15:52:11) /61.2.196.101
respected sir,
i have compleated my b tech in electronics and commmunication enggineering under cusat with an aggrigate of 67.3%.if there is any vacancy please inform me.

Re: safety officer job

Posted by ANOOP.CS, (2010-07-01 12:28:19) /117.204.96.230
i am passed in fire& safety
anoop.c
s/o chandran.k
panchajayam(ho)
kayaramkulam
thenkurissi
palakkad
kerala
pin 678671
mob:-9809249435,9746679767 begin_of_the_skype_highlighting 9746679767 end_of_the_skype_highlighting

Re: seeking for the post of a safety oficer

Posted by Amith Issac Saldanha, (2010-06-27 18:39:17) /61.1.132.155
Respected Sir,
I am a fire and safety engineering diploma holder from mysore and also with the diploma certificate i have also undergone practical training in fire fighting and fire prevention at banglore and also i have undergone training in first aid with govt certificate ...
sir am well pleasing to work in your esteemed institution called BEML. if any vacancy for the post of safety officer please contact me...
cell no; 9481168881 Res no: 0821-2402983

Re: Application for iob.

Posted by Aiswarya.V.T, (2010-06-19 14:11:38) /59.93.2.239
Respected sir,
I hav completed under graduation course in Bachelor of Computer Application in 2010(under Bharathiyar University).I'm quite fluent in languages(Hindi,English,Malayalam,Tamil).I would like to work in your company.Looking for favourable reply from your side,for any suitable posts.
address:Aiswarya.V.T.
Thanikkkal House,
Theake Thara,Pudusseri,
Palakkad,Kerale.
pin-678623.
ph:0491-2567229,mob:9048424499.

Re: application for the post of mechanic

Posted by binu velayudhan, (2010-06-19 13:17:09) /78.89.50.0
i have done iti in mechanic motor vehicle and currently working as a hydraulic mechanic in kuwait defence for last 8 years if any kind of requirement in his company pls mail me binucsa@yahoo.com phone india 9946785030 kuwait 00965 99292432

Re: graduate-fresher

Posted by ramprasadh, (2010-06-18 18:14:57) /117.254.153.247
i completed my engineering in electrical and electronics .im a 2010 passed out.i reside in chekkanthara palakkad.im eagerly looking forward to work in beml palakkad.

Re: Application for field service engineer

Posted by Yathish G I, (2010-06-16 20:19:13) /59.99.64.42
Dear sir
im Yathisha i want field service engineer job in hydraulic side

Re: Application for suitable Job

Posted by Naveen kumar.K.P, (2010-06-13 20:06:01) /112.110.27.170
NAVEEN KUMAR.K.P.

naveen.imbit@gmail.com

s/o K.Purushotham,

Kodlahalli,Koratagere(taluk),

Tumkur(district),Pin:572121,

Phone(M):9743644371

________________________________________________________________________

OBJECTIVE:

Seeking to work in a professionally stimulating environment ,which can give me the opportunity to exploit my creative and technical skills.

ACADEMIC PERFORMANCE:

Graduation:Bachelor of Engineering.

Branch :Industrial Engineering and Management

Semester
Percentage
Average
College
University

1st
55.10%
59.84%
Bangalore Institute of Technology
Visweswaraya Technological University

2nd
60.13%

3rd
55.44%

4th
54.44%

5th
53.67%

6th
59.89%

7th
80.22%

Course
Institution
Aggregate

10th standard
Jawahar navodaya vidyalaya
65.80%

12th standard
sree siddaganga PU college for Boys
54.66%

TECHNICAL SKILLS:

Language Known : C-Programming.

CAD/CAM Softwares : Autocad,Solid edge,CNC train.

Simulation software : Witness

ERP Software : Sixth sense,Lindo.

OTHER ACHIEVEMENTS:

● Member of Mechanical Engineers Association,Chennai.

● Participated in COLLOQUIUM on prospects in Project Management and infrastructure

Development conducted by SCHOOL OF MANAGEMENT FOR INFRASTUCTURE

AND DEVELOPMENT STRATEGIES-INDIA.

HOBBIES:

●Watching movies and listening to music.

●Sports like Cricket,Football,Voleyball,Tabletennis,chess.

●Reading Books.

PERSONAL PROFILE:

Name : Naveenkumar.K.P.

Father’s Name : Purushotham.

Nationality : Indian.

Date of Birth : 6th may 1989.

Languages Known : English,Hindi,Kannada,Telugu.

DECLARATION:

I here by declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of above mentioned particulars.

PLACE : Bangalore

DATE : 26/3/2010 Naveenkumar.K.P.

NAVEEN KUMAR.K.P.

naveen.imbit@gmail.com

s/o K.Purushotham,

Kodlahalli,Koratagere(taluk),

Tumkur(district),Pin:572121,

Phone(M):9743644371

________________________________________________________________________

OBJECTIVE:

Seeking to work in a professionally stimulating environment ,which can give me the opportunity to exploit my creative and technical skills.

ACADEMIC PERFORMANCE:

Graduation:Bachelor of Engineering.

Branch :Industrial Engineering and Management

Semester
Percentage
Average
College
University

1st
55.10%
59.84%
Bangalore Institute of Technology
Visweswaraya Technological University

2nd
60.13%

3rd
55.44%

4th
54.44%

5th
53.67%

6th
59.89%

7th
80.22%

Course
Institution
Aggregate

10th standard
Jawahar navodaya vidyalaya
65.80%

12th standard
sree siddaganga PU college for Boys
54.66%

TECHNICAL SKILLS:

Language Known : C-Programming.

CAD/CAM Softwares : Autocad,Solid edge,CNC train.

Simulation software : Witness

ERP Software : Sixth sense,Lindo.

OTHER ACHIEVEMENTS:

● Member of Mechanical Engineers Association,Chennai.

● Participated in COLLOQUIUM on prospects in Project Management and infrastructure

Development conducted by SCHOOL OF MANAGEMENT FOR INFRASTUCTURE

AND DEVELOPMENT STRATEGIES-INDIA.

HOBBIES:

●Watching movies and listening to music.

●Sports like Cricket,Football,Voleyball,Tabletennis,chess.

●Reading Books.

PERSONAL PROFILE:

Name : Naveenkumar.K.P.

Father’s Name : Purushotham.

Nationality : Indian.

Date of Birth : 6th may 1989.

Languages Known : English,Hindi,Kannada,Telugu.

DECLARATION:

I here by declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of above mentioned particulars.

PLACE : Bangalore

DATE : 26/3/2010 Naveenkumar.K.P.

Re: MOHD SHAKEEL

Posted by rikishi, (2011-03-12 09:47:34) /111.93.1.34

MOHD SHAKEEL
Contact No: 9704696542
E mail: shakeel.mhmmd@gmail.com
ADDRESS:
MOHD SHAKEEL
H.No: 2-139,
Arutla (V),
Manchal (M),
Ranga Reddy (D),
Pin 50158
CAREER OBJECTIVE:
To become a good management professional
PROFILE:
• Ability to prioritize delegate tasks and make sound decision.
• Versatile and flexible in nature can adaptable to any organizational changes when protocol demands.
• Holding good communication and public-relation skills and can reciprocate positively towards the work.
TECHNICAL SKILLS:
Software skills:
• Operating systems: Windows VISTA, Linux. Database: MS-Office, DTP
EXPERIENCE:
• Have worked as sales officer in HDFC bank Hyderabad.
• Have four years experience in teaching.
STRENGTHS:
• Honesty, Punctuality, Sincerity, enthusiastic in learning new things carefully and perfectly, accepting criticism, hard working and helping nature.
ACHIEVEMENTS:
• Have achieved first rank and best student award in B.Sc.
• Have achieved School Second Rank in S.S.C.
• Have achieved first prize in essay writing competition in S.S.C
CO-CURRICULAR ACTIVITIES:
• Have worked as school pupil leader in S.S.C.
• Have worked as student organization president in Inter and B.Sc.
• Have worked as “Entertainment Club” president in M.B.A

EDUCATION:
Examination Discipline/Specialization School/ College Board/University Year of pass
M.B.A Marketing And H.R. Nalla Malla Reddy Engg.College J.N.T.U. 2010
B.Sc Life sciences
(B.Z.C) Ibrahim Patan Degree College Osmania University 2005
Intermediate Botany, Zoology, Physics, chemistry Pratibha Junior college Board of Intermediate Education 2001
S.S.C S.S.C Z.P.H.S Arutla Board of Secondary Education 1999
TRAINING AND CERTIFICATIONS:
• Have communication skills training by experts in NMREC in MBA.
• Successfully completed diploma in English in Rama Krishna math Hyderabad.
PERSONAL PROFILE:
Name: Mr Mohd Shakeel
Father’s Name: Mr Shabbeer
Mother’s Name: Mrs Qaisar
Date of birth: 03-08-1983
Sex: Male
Marital status: Unmarried
Nationality: Indian
Hobby: Browsing computer and chatting with friends.
Language proficiency: Telugu, Hindi, English
Permanent Address:
H.No: 2-139,
Arutla (V),
Manchal (M),
Ranga Reddy (D),
Pin 50158
Andhra Pradesh.
DECLARATION:
I here by declare that all the above mentioned information is correct to the best of my knowledge.

Place:
Date: (MOHD SHAKEEL)
Re: Job
Posted by Avinash G, (2011-01-29 16:22:41) /122.166.45.247
RESUME

AVINASH.G
#105, 1st main, 1st cross,
Kothanur, J P nagar 8th phase, PH: 080-26850050, 9886852212
Bangalore-560076 Email ID : avireddy12@yahoo.in

OBJECTIVE

To obtain a challenging and responsible position in the organization and to contribute effectively to the success of the organization and further improve my personal skills.

STRENGTHS

 Ability to handle complex situation in simplified manner.
 Ability and desire to learn and adapt to new technologies.
 To maintain a positive attitude always while with the team and organization.

ACADAMIC CREDENTIALS

COURSE

BRANCH
YEAR OF PASSING
INSTITUTE AGGREGATE PERCENTAGE
Bachelor of Engineering Mechanical Engineering
May 2010 Vemena institute of technology, Bangalore-19
72% FCD
PUC PCMB April 2006 BHSFGC, Jayanagar, Bangalore
52%
SSLC NA March 2004 B.M.E.S, Jayanagar

68%

PROJECT

 Fabrication of solar refrigerator using activated carbon and methanol

DESIGN SOFTWARE KNOWN
 Solid edge
 Catia v5

ACHIEVEMENTS

EXPERIENCE:
Presently working as PRODUCTION ENGINEER in an Mechanical Industry called EXCEL WIRECUT.INC since 6 months. Manufacturer of precision Mechanical Components like Adaptor, Endcap & Piston of an pneumatic actuator for an MNC called FLOWSERVE INDIA PVT LTD, WHITE FIELD, BANGALORE.

PERSONAL DETAILS
PERSONAL INFORMATION:
Name Avinash.G
Father’s name Gopal reddy.R
Date Of Birth 12th October 1988
Languages Known
To speak
To read
To write

English, Telugu, Kannada
English, Kannada, Hindi,
English, Kannada, Hindi

Marital Status Single
Address #105, 1st main, 1st cross, Kothanur, J P nagar 8th phase, Bangalore-560076
Hobbies Playing cricket.
Contact Number: Mobile – 9886852212

DECLARATION:

I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Date:
Place: Bengaluru Avinash.G

Re: looking for Assistant Security Officer
Posted by NARAYANAN.K, (2011-01-10 12:10:48) /59.92.251.192
Sir, My name is Narayanan.K retired from Paramilitary service in the rank of J.C.O during last year 2009 after completion of 23 years service...have passed SSLC from Calicut niversity (Kerala) and ahving one year experiense as a Security supervisor at TYCO fire and Security Film City G.Noida (U.P) and presently working at Hindustan Petrolium Corporation ltd (Bottling Plant) at Kattipalla (Mangalore) as a Security Head Guard
E_mail Karimbannarayanan@yahoo.in
Contact number 09483804544 (Karnataka)
09847012895
Father's name Choolan.K
Address "PRATHYSASA"
Devathiyal Parambil house
Thenhippalam (Post & Village)
Malapuram ( District)
Kerala-673636
Marital Status Married
Height 181 Cms
Language known
English,Hindi,Malayalam,Kannada
Drving license LMV,HPMV.HGMV with badge

I Narayanan.K is hereb by declare that the above mentioned information is true to the best of my knowledge and belief and awaiting for your favorable reply

Thanks & Best Regards
Narayanan.K

Re: Application for the post of Assistant Security Officer
Posted by Santosh Navale, (2011-01-06 13:45:25) /59.164.102.75
I have Completed B.A, & I have 2 years Experince in Clerk & 5 years of expereince in PROGRESSIVE CIVIL CONSTRUCTION CO. (P) LTD, I also done my Diploma in Computer.

kindly contact me on : 9242085689
awaiting for your reply
Re: safetyofficer
Posted by Sudhanshu Kushwaha, (2011-01-04 19:36:41) /27.58.73.176
I am B.sc.&Advance Diploma In Fire Safety Eng. to complet for job to the company ESSAR STEEL LTD. HAZIRA

Re: qqqq

Posted by rick, (2011-03-12 09:44:02) /111.93.1.34

No. Equipment Specification
A WATER COOLED ROOF
1 WCR inlet / outlet water hoses 200nb x 4700long ,ss316 corrugated ,flexible metal hose , ss304 single wire braided ,both end swivel flanged ,ANSI B 16.5 ,CLASS 150 ,Working pr - 6bar , Test pr- 9bar ,Min bend radius - 850mm , temp - 200c
2 Cylinder of WCR door III Pneumatic cylinder ø100/25 -580
3 Cylinder of WCR door II Pneumatic cylinder ø100/25 -500
4 Cylinder of WCR door I Pneumatic cylinder ø100/25 -680
5 Hose of WCR Metal flexible hose id 38 x 750mm,both end 1 1/2" BSP swivel nut with 60° cone O ring , one end straight ,other end 90° elbow ,WP 6bar , ANSI 304 ,test pr 10bar , temp 200C
6 Hose of WCR Metal flexible hose id 32 x 750mm,both end 1 1/2" BSP swivel nut with 60° cone O ring , one end straight ,other end 90° elbow ,WP 6bar , ANSI 304 ,test pr 10bar , temp 200C
7 Hose of WCR Metal flexible hose id 32 x 1150mm,both end 1 1/2" BSP swivel nut with 60° cone O ring , one end straight ,other end 90° elbow ,WP 6bar , ANSI 304 ,test pr 10bar , temp 200C
8 swivel joint swivel joint RD1 MO1 DN32 PN 40 , 42CrMo4
9 Adaptor male-male hex adaptor 1 1/2" BSP male threads ,with 60°cone both side
10 hex connector male-male hex adaptor 1 1/4" BSP male threads ,with 60°cone both side
11 Insulation disc Insulation disc , ø275/225 x3 , (HGW ) 2372_4
12 Insulating sleeve Insulating sleeve , ø21 / 17 x 65 , (HGW ) 2375_4
13 Insulating washer Insulating washer ,ø35/23 x5 , (HGW ) 2375_4
14 Butterfly valve 200nb Body cast steel casing , End connection flange (ANSI B16.5 class 150)
15 Butterfly valve 200nb Body cast steel casing , End connection flange (ANSI B16.5 class 150)
16 Ball Valve Flanged RF 1 1/2" NB Flange Accor. To ANSI B 16.5 CS
17 Ball Valve Flanged RF 1 1/4" NB Flange Accor. To ANSI B 16.5 CS
18 Male male Adaptor 1 1/2" BSP "Both End 1½"" BSP Thread with 60º cone
suitable for hose"
19 Male Fittings 1 1/2" BSP "Welding Stud, one end 1½"" BSP male
thread with 60º cone and other end plain"
20 Male male Adaptor 1 1/4" BSP "Both End 1 ¼"" BSP Thread with 60º cone
suitable for hose"
21 "Metal Flexible Hose ID38 x 750
AISI 304" "Corrugated,Both end 1½"" BSP swevel
nut with 60º cone O-ring,one end straight
other end 90º elbow, WP-6 Bar,
Test Pr-10 Bar.W.Temp-100ºC"
22 "Metal Flexible Hose ID32 x 750
AISI 304" "Corrugated,Both end 1¼"" BSP swevel
nut with 60º cone O-ring,one end straight
other end 90º elbow, WP-6 Bar,
Test Pr-10 Bar.W.Temp-100ºC"
23 "Metal Flexible Hose ID32 x 1150
AISI 304" "Corrugated,Both end 1¼"" BSP swevel
nut with 60º cone O-ring,one end straight
other end 90º elbow, WP-6 Bar,
Test Pr-10 Bar.W.Temp-100ºC"
24 Swivel Joint "RD1 M 01 DN32 PN40 42CrMo4
1½"" BSP Female Thread at both ends
Make-Klass"
25 Flange Slip-On RF 1¼" Class-150 ANSI B 16.5 A105 N
26 Flange Slip-On RF 1½" Class-150 ANSI B 16.5 A105 N
27 "Hexa head bolt with nut
and washer(2 nos)" M12 x 55 8.8
28 Gasket 2x OD73 / ID 48 Gr.W2
29 Gasket 2x OD63 / ID 42 Gr.W2
30 Hexa Head Screw with Washer M20 x 45 A2-70
31 Sealing Chord 6 x 6 x 1412 CERAFELT W.T-500º
32 Socket Coupling 1" BSP 1" BSP
33 Press. Relief Valve 1" BSP "Male Thread-1"" BSP, Range-0 to10 Bar,
Set Pr.-7 Bar"
34 Socket 25 NB
35 Plug 25 NB

Water Cooled Door 1

1 Pneumatic Cylinder Bore-Ø100, Rod-Ø25, Stroke-680
2 Water Cooled Door-I
3
4 Door-I Base Plate
5
6 Door-I Top Cover
7
8 Door-I Side Cover
9
10 Door-ISlide Bar 40 x 50 x 1270 IS 8500 Fe 450 B
11 Bush IS 28 PBZ Gr.2
12 Cylinder Mounting block 24 x 75 x 90 IS 2062 Fe 410W B
13 Pin 20 x 95 IS 1570 20 C8
14 Washer Ø40 / Ø21 x 5 Fe410W A
15 Split Pin 5 x 40
16 Allen Bolt M16 x 60 8.8
17 "Hexa head bolt with nut
and washer" M12 x 100 ISO 4014 8.8
18 "Hexa Head bolt with
Spring Washer" M16 x 30 8.8
Water Cooled Door II

1 Pneumatic Cylinder Bore-Ø100, Rod-Ø25, Stroke-500
2 Bush IS 28 PBZ Gr.2
3 Cylinder Mounting block 24 x 75 x 90 IS 2062 Fe 410W B
4 Pin 20 x 95 IS 1570 20 C8
5 Door-II Side Cover
6
7 Door-II Water Cooled
8
9 Door-II Base Plate
10
11 Door-II Top Cover
12
13 Door-II Slide Bar 40 x 55 x 920 Fe 540 B
14 Washer Ø40 / Ø21 x 5 Fe410W A
15 Split Pin 5 x 40
16 Allen Bolt M16 x 60 8.8
17 "Hexa head bolt with nut
and washer" M12 x 100 ISO 4014 8.8
18 "Hexa Head bolt with
Spring Washer" M16 x 30 8.8
Piping for water cooled roof
1 Hose NB200 x 4700 Long "S.S Corrugated Flanged Metal Hose end
connection with Swivel flange
(ANSI B 16.5, Class-150)"
2 Butterfly Valve NB 200 Body Cast Steel Casting,End connection flanged (ANSI B16.5, Class-150),Actuator-Chain,Wheel
3 Mag. Flowmeter NB 150 "Electrical Supply
Both End Flange as per ANSI B16.5,
Class-150, Make-BHEL"
4 Pressure Indicated Switch "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
5 Pressure Indicator "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
6 RTD for NB 200 "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
7 "Elbow 2, A2/90 DEG NB 200
SCH-40, IS 11428 Gr.2"
8 Reducer 2, B2, SCH-40 NB 200x150, IS 11428 Gr.2
9 "Flange Slip-On RF NB 8"" Class-150
ANSI B 16.5 A105 N"
10 "Flange Slip-On RF NB 6"" Class-150
ANSI B 16.5 A105 N"
11 "Pipe 8"" NB, SCH-40
ANSI-B36.10 A.53,Gr.B" "Pipe OD 219.1x 8.18 Thk
Welded, Black Pipe"
12 "Pipe 6"" NB, SCH-40
ANSI-B36.10 A.53,Gr.B" "Pipe OD 168.3 x 7.11 Thk
Welded, Black Pipe"
13 "Half Coupling 1/2"" NPT
ANSI B 16.11 A 105 N"
14 "Reducer 2, B2, SCH-40
NB 250x200, IS 11428 Gr.2"
15 Stud Bolt M20 x 220 B 8.8
16 "Hexa Head Bolt With Nut &
Punched Washer" M20 x 100 8.8
17 "Hexa Head Bolt With Nut &
Punched Washer" M16 x 100 8.8
18 Gasket OD 262 x 220 x 2 CAF Gr. W/2
19 Gasket OD 207 x 169 x 2 CAF Gr. W/3





B ELECTRODE ARM ASSEMBLY
1 Insulating plate Insulating plate , 30 x480 x 2760 , (HGW ) 2372_4
2 Insulating sleeve Insulating sleeve ø 82 /68 x 372 , (HGW ) 2375_4
3 Insulating sleeve Insulating washer ø184 / 84 x 25 , (HGW ) 2372_4
4 Insulating washer Insulating sleeve ø 184 /141 x 150 , (HGW ) 2375_4
5 Insulating cap Insulating cap ø184 x 25 (HGW ) 2372_4
6 CU pipe 1 Cu pipe
7 CU pipe 2 Cu pipe
8 CU pipe 3 Cu pipe
9 Contact shoe Contact shoe , CU
10 Electrode holder assembly Electrode holder assembly
11 Insulating sleeve Insulating sleeve ø31 /21 x 43 , DIN7735 ,(HGW ) 2372_4
12 Insulating sleeve Insulating sleeve ø64 / 32 x 12 , DIN7735 ,(HGW ) 2372_4
13 Insulating plate Insulating plate , 15x330x470 , DIN7735 ,(HGW ) 2372_4
14 Insulating sleeve Insulating sleeve ø31 /21 x 55 , DIN7735 ,(HGW ) 2372_4
15 Insulating plate Insulating plate 15x210x460 , DIN7735 ,(HGW ) 2372_4
16 electrode declamping cylinder stroke 35mm , WP 180bar TP 270bar
17 Hoses of holder 1 1/4"NB x 600 mm , ss braided hose ,both side swivel female union 1 1/4" BSP threads with 24° cone O ring ,WP 6bar ,TP 10bar
18 Hose adaptor of holder Male -Female threaded adaptor 1 1/4" BSP , ss , one end 1 1/4" BSP male with 24° cone , one end 1 1/4" BSP female
19 Hose adaptor of holder Male -Male threaded adaptor 1 1/4" BSP , ss , both end 1 1/4" BSP male with 24° cone
20 Water cooled cable
21 Hose 1" SS ,corrugated hose 25 x 210LG , both end SS 90° elbow with swivel nut 1" BSP threads , 24° taper cone O ring seal
22 M/M adaptor one end 1"BSP with 24° cone and other end 1" BSP ,WP -6bar , TP -10bar
23 Hose Rubber hose 40x 230LGX 6mm thk ,carbon & iron free ,WP -6bar , TP-10bar , tepm - 200C
24 Hose clamp Hose clamp 70 , IS 4762, AISI 304
25 Hardwood frame hardwood frame 310x390x600 , laminatedwood
26 Insulation plate Insulation plate 16x460x670 , laminatedwood
27 Bolt HEX S.S 20 X 100 MM
28 Washer Ø64/22X10
29 Pin straight spring type Ø8x30,ISO 8752
30 Washer Ø40/Ø21X8
31 Washer Ø45/Ø25X8
32 Nut HEX SS 20MM
33 Washer Ø90/Ø22X16
34 Rod Compression Ø100X128
35 Disc Ø235/Ø100.5x15
36 Spring conical disc Ø200/Ø102X16.2
37 Disc Ø205/Ø100.5x11.3
38 Retainer Ø205/Ø102X50
39 Lock nut M100X2,TYPE-KMT 20
40 Pin straight spring type Ø8x100,ISO 8752









C ROOF LIFTING ARRANGMENT
1 Hyd roof lifting cylinder
2 Insulating plate Insulating plate, 20x290x290 , (HGW ) 2372_4
3 Insulating sleeve Insulating sleeve, ø31/21 x50 , (HGW ) 2375_4
4 Insulating washer Insulating washer, ø64/32 x 12 , (HGW ) 2375_4
BELLOW FOR CYL.,ALU,ROD-70MM,STR-800MM
ARGON TOP LANCE
1 Helical Geared motor (for lance storage stand) Helical geared motor , Make : -NORD , Type : - SK63F -90 S/6 Bre 10 HL , Output power 0.75kw , Output rpm 3.5
2 Pinion foe Helical Geared motor (for lance storage stand) pinion ø200/65 x 126 , IS1570 , 45C8 P35 T3
3 Oil for geared motor of argon top lance ISO VG 220
4 Oil for gear box of argon top lance ISO VG 320, FUD-14", Primery Unit capacity - 9 Litre, Secondary unit capacity - 30 Litre
5 Geared motor (for Argon top lance)
6 Geared Motor for argon lance Hoist Make- NORD, Power rating - 11Kw, Out put Speed- 1460/1035 rpm, Type- SK41E-160MH/4 Bre 100HL
7 Geared Motor for argon lance Swivel Make- NORD, Power rating - 0.75Kw, Out put Speed- 940/3.5 rpm, Type- SK63-90S/6 Bre 10 HL
8 Oil for geared motor of lance storage stand ISO VG 220
9 Roller chain for argon top lance Roller chain , simple ,size - 40A x 23495 LG ,ISO : 606 , pitch 63.5
10 hose for argon 40nb x 11300 long , ss corrugated , ANSI B 16.5 ,(300LBS ) ,Both end swivel flange of 40nb
11 hose for argon 40nb x 1000 long , ss corrugated , ANSI B 16.5 ( 300LBS ) one end swivel flange of 40nb and one end swivel nut ss , 1 1/2"BSP , 24 degree cone with O ring seal
12 Double stage reduction gear box Double stage reduction gear box , size :- fud -14" , Make : -santhi gears or equivalent



F LADLE
1 QRC QRC , ss, FD 45 - 16 ,Make : - EATON or equivalent ,part no : - FD45-1075-16-16 ,complete coupling
2 QRC QRC , ss, FD 45 - 16 ,Make : - EATON or equivalent ,part no : - FD45-1078-16-16 , male half
3 SS Hose 25nb x3000lg , SS corrugated ,with one end swivel female union G 1" , other end male connector G 1"
4 MS pipe of Argon bottom purging
5 Clamp of MS pipe of Argon bottom purging
6 HOSE,ARGON PURGING,25 NB X 45 MTR.LG
7 O-RING,NBR,OD:33XID:26X3.5MM
8 HOSE PIPE SS BRAIDED 3/4*1 MTR
9 HOSE,SS CORRUGATED,3/4"X3MTR


G WIRE FEEDING SYSTEM
1 driven rolls(minex wire feederm/c)
2 tension spring for wire feeder(minex)
3 pneumatic cylinder for wire feeder(minex)
4 pulley timer P/N-P44-14M-30F
5 pulley timer P/N-P44-14M-30
6 duplex chain
7 oil for wire feeding geared motor 1" pitch ,4500long ,
8 Geared motor for wire feeding
9 coupling for geared motor geared motor,1.1 KW,P/N-G-43
10 PULLEY TIMER,P/N-P32-14M-70
11 PULLEY TIMER,P/N-P80-14M-70
12 PULLEY TIMER,P/N-P44-14M-55F
13 PULLEY TIMER,P/N-P44-14M-55
14 PINION SPUR GEAR,P/N-B-A32
15 OIL SEAL,P/N-SD-184
16 VALVE SOLENOID,MHE-3-1/4" BSP
17 OIL SEAL,P/N-SC-38
18 OIL SEAL,P/N-SC-165
PIPE,SS-310,SIZE:5" NB,SCH-80




H HOSE PIPE FOR LIVE PART
1 Non return valve 1" Body -plate -cast steel casing ,End conn -flanged ( ANSI B16.5 ,class 150)
2 Ball valve 2 1 /2" Body -carbon steel casing , Ball - SS ,Type - 2 piece , full bore ,Both end flanged ( ANSI B16.5 ,Class 150 )
3 Ball valve 1 1 /2" Body -carbon steel casing , Ball - SS ,Type - 2 piece , full bore ,Both end flanged ( ANSI B16.5 ,Class 150 )
4 Ball valve 1" Body -carbon steel casing , Ball - SS ,Type - 2 piece , full bore ,Both end flanged ( ANSI B16.5 ,Class 150 )
5 Ball valve 1/2" Body -carbon steel casing , Ball - SS ,Type - 3 piece , full bore ,Both end 1/2" BSP female threads ( ANSI B16.5 ,Class 150 )
6 Gate valve 2" Body -carbon steel casing , Both end flanged ( ANSI B16.5 ,Class 150 ),Hand wheel -carbon steel
7 Gate valve 1 1/2" Body -carbon steel casing , Both end flanged ( ANSI B16.5 ,Class 150 ),Hand wheel -carbon steel
8 Gate valve 1" Body -carbon steel casing , Both end flanged ( ANSI B16.5 ,Class 150 ),Hand wheel -carbon steel
9 Carbon free hose 63ID x12000 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 2 1/2" SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C
10 Carbon free hose 50ID x12000 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 2 " SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C
11 Carbon free hose 31.5ID x12000 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 1 1/4 " SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C
12 Carbon free hose 31.5ID x8850 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 1 1/4 " SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C
13 Carbon free hose 31.5ID x6150 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 1 1/4 " SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C
14 Carbon free hose 31.5ID x300 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,one end 1 1/4 " SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C ,other eng 1 1/4" swivel nut
15 Carbon free hose 25.4ID x3600 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 1 " SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C
16 Carbon free hose 25.4ID x2500 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 1 " SS swivel flange ANSI B16.5 Class150, WP -10bar , Temp -100C
17 Carbon free hose 25.4ID x600 Synthetic rubber , Ele non conducting ,ceramic cloth cover ,Both end 1 " BSP ( F ) union swept elbow90DEG SS, WP -10bar , Temp -100C
Piping For Lives Parts
1 Distributor-I
2 Distributor-II
Collector-I
Collector-II
Pipe Connection
Mag. Flowmeter NB 150 "Electrical Supply
Both End Flange as per ANSI B16.5,
Class-150, Make-BHEL"
Pressure Indicator "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
Pressure Relief Valve "Electrical Supply
End Connection 1"" BSP male thread,"
RTD for NB 200 "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
Non Return Valve NB 1" "Body,Plate-Cast Steel Casting
End Connection ANSI B 16.5, Class-150"
Ball Valve 2 1/2" "Body Ends-Flange as per ANSI B 16.5,
Class-150, Body-Carbon Steel Casting,
Ball-SS,Type-2 Piece,Full Bore"
Ball Valve 1 1/2" "Body Ends-Flange as per ANSI B 16.5,
Class-150, Body-Carbon Steel Casting,
Ball-SS,Type-2 Piece,Full Bore"
Ball Valve 1" "Body Ends-Flange as per ANSI B 16.5,
Class-150, Body-Carbon Steel Casting,
Ball-SS,Type-2 Piece,Full Bore"
Ball Valve 1/2" "Body Ends-Flange as per ANSI B 16.5,
Class-150, Body-Carbon Steel Casting,
Ball-SS,Type-3 Piece,Full Bore"
Gate Valve NB 2" "Body Ends-Flange as per ANSI B 16.5,
Class-150, Body-Carbon Steel Casting,
Hand Wheel-Carbon Steel"
Gate Valve NB 1 1/2" "Body Ends-Flange as per ANSI B 16.5,
Class-150, Body-Carbon Steel Casting,
Hand Wheel-Carbon Steel"
Gate Valve NB 1" "Body Ends-Flange as per ANSI B 16.5,
Class-150, Body-Carbon Steel Casting,
Hand Wheel-Carbon Steel"
"Flange Slip-On RF NB 6"" Class-150
ANSI B 16.5 A105 N"
"Elbow 2, A2/90 DEG NB 150
SCH-40, IS 11428 Gr.2"
"Carbon Free Hose ID 63 x 12000
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 2 1/2"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100ºC"
"Carbon Free Hose ID 50 x 12000
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 2"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100⁰C"
"Carbon Free Hose ID 31.5 x 12000
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 1 1/4"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100ºC"
"Carbon Free Hose ID 31.5 x 8850
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 1 1/4"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100ºC"
"Carbon Free Hose ID 31.5 x 6150
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 1 1/4"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100ºC"
"Carbon Free Hose ID 31.5 x 100
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 1 1/4"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100ºC"
"Carbon Free Hose ID 25.4 x 3600
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 1"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100ºC"
"Carbon Free Hose ID 25.4 x 2500
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 1"" SS Swivel Flange,ANSI B16.5, CL-150,WP-10Bar,Temp-100ºC"
"Carbon Free Hose ID 25.4 x 600
Synth.Rubber" "Elec.Non Conducting,Glass Wool Covered
Both end 1"" BSP (F)Union Swept Elbow90⁰ SS ,WP-10Bar,Temp-100ºC"
Thread Adapptor M/M 1" BSP Male/Male Thread Adaptor 1" BSP on both Ends with 24º cone. Make- GAYTRI or Equ.
Elbow 90⁰ NB 25 1" BSP male thread on both end.
"Pipe NB 1"", SCH-40 x 75
ANSI B 36.10 A 53 Gr.B" "Pipe OD 33.4 x 3.38 Thk, Black Pipe
1"" BSP Male thread on both side."
"Flange Slip-On RF NB1 1/4"" Cl-150
ANSI B 16.5 A240 Gr.316"
"Flange Slip-On RF NB1"" Cl-150
ANSI B 16.5 A240 Gr.317"
"Union 1 1/4"" BSP
ANSI B 16.11 A 105" 1 1/4" BSP Male thread on one end and 1 1/4" BSP Female thread on other end.
"Union 1"" BSP
ANSI B 16.11 A 106" 1" BSP Male thread on one end and 1" BSP Female thread on other end.
"Pipe NB 1 1/4"", SCH-40 x 55
ANSI B 36.10 A 53 Gr.B" "Pipe OD 42.2 x 3.56 Thk, Welded Black Pipe
1 1/4"" BSP Male thread on one end."
"Pipe NB 1"", SCH-40 x 165
ANSI B 36.10 A 53 Gr.B" "Pipe OD 33.4x 3.38 Thk, Welded Black Pipe
1"" BSP Male thread on one end."
"Pipe NB 1"", SCH-40 x 50
ANSI B 36.10 A 53 Gr.B" "Pipe OD 33.4x 3.38 Thk, Welded Black Pipe
1"" BSP Male thread on one end."
Hexa Head Bolt with Nut and punched washer "M16 x 70 AISI 304
Non Magnetic Steel"
Hexa Head Bolt with Nut and punched washer "M16 x 65 AISI 304
Non Magnetic Steel"
Hexa Head Bolt with Nut and punched washer "M12 x 55 AISI 304
Non Magnetic Steel"
Hexa Head Bolt with Nut and punched washer "M12 x 50 AISI 304
Non Magnetic Steel"
"Pipe Clamp PCH 1.73
Polyamide" "PCH 1.73 for 65 NB pipe
Make-Hyd-Air or Equ."
"Pipe Clamp PCH 1.60
Polyamide" "PCH 1.60 for 50 NB pipe
Make-Hyd-Air or Equ."
"Pipe Clamp PCH 1.48
Polyamide" "PCH 1.48 for 40 NB pipe
Make-Hyd-Air or Equ."
"Pipe Clamp PCH 1.42
Polyamide" "PCH 1.42 for 32 NB pipe
Make-Hyd-Air or Equ."
"Pipe Clamp PCH 1.33
Polyamide" "PCH 1.33 for 25 NB pipe
Make-Hyd-Air or Equ."
"Flange Slip-On RF NB 2 1/2"" Cl-150
ANSI B 16.5 A 105 N"
"Flange Slip-On RF NB 2"" Cl-150
ANSI B 16.5 A 105 N"
"Flange Slip-On RF NB 1 1/2"" Cl-150
ANSI B 16.5 A 105 N"
"Flange Slip-On RF NB 1 1/4"" Cl-150
ANSI B 16.5 A 105 N"
"Flange Slip-On RF NB 1"" Cl-150
ANSI B 16.5 A 105 N"
Gasket OD 262 / 220 x 3 CAF Gr. W/2
Gasket OD 207 / 169 x 2 CAF Gr. W/2
Gasket OD 115 / 77 x 2 CAF Gr. W/2
Gasket OD 95 / 61 x 2 CAF Gr. W/2
Gasket OD 85 / 49 x 2 CAF Gr. W/2
Gasket OD 75 / 43 x 2 CAF Gr. W/2
Gasket OD 63 / 35 x 2 CAF Gr. W/2
RTD for NB 50 "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
RTD for NB 40 "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
RTD for NB 32 "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
RTD for NB 25 "Electrical Supply
For NB 200 Pipe, End Connection 1/2"" NPT male thread,"
"Reducer 2,B2 NB 40 x 32, SCH-40
IS-11428 Gr.2" Pipe OD 48.3 x 3.68 Thk
"Reducer 2,B2 NB 32 x 25, SCH-40
IS-11428 Gr.2" Pipe OD 42.2 x 3.56 Thk
"Elbow2, A2/ 90º NB 65, SCH-40
IS-11428 Gr.2" Pipe OD 73 x 5.16 Thk
"Elbow2, A2/ 90º NB 50, SCH-40
IS-11428 Gr.2" Pipe OD 60.3 x 3.91 Thk
"Elbow2, A2/ 90º NB 40, SCH-40
IS-11428 Gr.2" Pipe OD 48.3 x 3.68 Thk
"Elbow2, A2/ 90º NB 32, SCH-40
IS-11428 Gr.2" Pipe OD 42.2 x 3.56 Thk
"Elbow2, A2/ 90º NB 25, SCH-40
IS-11428 Gr.2" Pipe OD 33.4 x 3.38 Thk
"Hexa Head Bolt With Nut &
Punched Washer" M20 x 100 8.8
"Hexa Head Bolt With Nut &
Punched Washer" M16 x 70 8.8
"Hexa Head Bolt With Nut &
Punched Washer" M16 x 65 8.8
"Hexa Head Bolt With Nut &
Punched Washer" M12 x 55 8.8
"Hexa Head Bolt With Nut &
Punched Washer" M12 x 50 8.8
Union 1/2" BSP "1/2"" BSP Male thread on both end
ANSI B 16.11 A 105"
Hexagon Nipple 1/2" BSP "1/2"" BSP Male thread on both end
ANSI B 16.11 A 106"
Calorific Type Flow Switch 50 NB End connection 1/2" NPT male threads
Calorific Type Flow Switch 40 NB End connection 1/2" NPT male threads
Calorific Type Flow Switch 32 NB End connection 1/2" NPT male threads
Calorific Type Flow Switch 25 NB End connection 1/2" NPT male threads
Coupling 1/2" NPT x 34 long ANSI B 16.11 A 105
Elbow 3, A3/45º NB 25 SCH 40 Pipe OD 33.4 x 3.38 Thk










I BOTTOM INERT GAS STIRRING
1 Flexible hose Synthetic rubber hose Id 25x500 , Ceramic cloth covered through out , both end 1" BSP female swivel nut ,WP - 16bar , temp -200C , with Male -Male adaptor
2 M/M adaptor M/M adaptor , 1" BSP one end and other end socket weld type 24° cone
J ELECTRODE NIPPLING & ACCESSORIES
electrode nippling cylinder with clevis stroke- 100mm , piston dia -120mm ,WP -180bar , TP -270bar
K PNEUMATIC PIPING
1 Air hose SS ,corrugated hose 15 x 400LG , both end 1/2" BSP swivel female union ,WP - 10bar , temp-100C ,ceramic cloth covered
2 Air hose SS ,corrugated hose 15 x 1500LG , both end 1/2" BSP swivel female union ,WP - 10bar , temp-100C ,ceramic cloth covered
3 Air hose SS ,corrugated hose 25 x 1500LG , both end 1" BSP swivel female union ,WP - 10bar , temp-100C ,ceramic cloth covered
L HYDRAULIC PIPING
1 HYD hose Rubber , Flow dia 12mm x 1200mm LG , WP - 275bar , TP - 415bar , WT - 100C ,Both end female swivel nut of M24 x 1.5 with O ring 24° cone ,seal - viton , hose shall be assembled with fire sleeve duly clamped
2 HYD hose Rubber , Flow dia 29mm x 1000mm LG , WP - 275bar , TP - 415bar , WT - 100C ,Both end female swivel nut of M52 x 2 with O ring 24° cone ,seal - viton,hose shall be assembled with fire sleeve duly clamped
3 HYD hose Rubber , Flow dia 12mm x 1500mm LG , WP - 275bar , TP - 415bar , WT - 100C ,Both end female swivel nut of M24 x 1.5 with O ring 24° cone ,seal - viton,hose shall be assembled with fire sleeve of OD-45 ,TEMP -200C duly clamped
4 HYD hose Rubber , Flow dia 15mm x 1500mm LG , WP - 275bar , TP - 415bar , WT - 100C ,Both end female swivel nut of M30 x 2 with O ring 24° cone ,seal - viton,hose shall be assembled with fire sleeve of OD-55 ,TEMP -200C duly clamped
5 HYD hose Rubber , Flow dia 19mm x 800mm LG , WP - 275bar , TP - 415bar , WT - 100C ,Both end female swivel nut of M36 x 2 with O ring 24° cone ,seal - viton,hose shall be assembled with fire sleeve of OD-55 ,TEMP -200C duly clamped
6 HYD hose Rubber , Flow dia 15mm x 12000mm LG , WP - 275bar , TP - 415bar , WT - 100C ,Both end female swivel nut of M30 x 2 with O ring 24° cone ,seal - viton,hose shall be assembled with fire sleeve of OD-27 ,TEMP -200C duly clamped
7 HYD hose Rubber , Flow dia 07mm x 600mm LG , WP - 275bar , TP - 415bar , WT - 100C ,Both end female swivel nut of M18 x1.5 with O ring 24° cone ,seal - viton,hose shall be assembled with fire sleeve of OD-65 ,TEMP -200C duly clamped
Preheater hood
ROUND BAR S.S 6 MM
VALVE NEEDLE SS 1",FOR LNG LINE
ADOPTER BRASS MALE WITH NUT 5/8"

D LADLE TRANSFER CAR
General Arrangement
1 coupling half rigid / half flexible , size - 60 , make:- GBM,ALLIANCE,RATHI,BIBBY,AALFLEX
2 brake drum coupling flexible , Type -CD ,size : -CD276 , love joy or equivalent
3 brake Elektromag or equivalent , A.C., electrohydaulic thrustor brake ,max braking torque =27.7 kg.m ,brake drum dia 250mm
4 Gear box Type:- Vertical helical with force lub system ,Size : -SDHA 400 , Ratio : - 190.5 : 1 , Make : - santhi
5 Drve assembely
6 DRIVE WHEEL ASSLY FLANGED
7 DRIVE WHEEL ASSLY
8 WHEEL ASSLY,IDLE
9 PUMP ROTARY CAPACITY:20LPM,RPM-1440
10 RUBBER SPIDER FOR COUPLING L-150
Car Frame
Emergency Hook
Flanged Wheel Assembly Ø1070 / Ø200 x 125 colar
Flanged Wheel Dia-1000 DIN EN 10293
Bearing Sph. Roller Bearing-22234 cc/w33
Bearing Housing

Axle Ø208 x 500 long 40Cr4Mo2T14
Ring 52 x Ø309 / Ø170 Fe410W B
Bearing Cover Ø279 / Ø170 x 27 Fe410W B
Lock Plate 145 x 30 x 1thk Fe410W A
Stud-Nut-washer M48 x 600 10.9
Bush Ø65 x 65 x Ø49
Washer Ø92 / Ø50 x 8thk 45C8
Flg. Drive Wheel Ass'Y. Ø1070 / Ø200 x 125 colar
Drive Shaft
Key 790 x 40 x 22
Wheel Assembly
Wheel Ø1000 x Ø200 x 195 width
Drive Wheel Assembly
Track Cleaner
Clearing Shovel
Rope Clip
Support Bracket
Guide Plate
Spring Buffer "Make-Insu Tech Corporation,
Kinetic Energy Capacity-14000 Kgf-cm
Code No-ITC/1204 e"
Drive Arrangement

Gear Box "Vertical Helical with forced lub system
Size-HQN 400,Ratio- 200:1,
Make-Shanthi"
Brake Drum Coupling Type-CD, Size-CD 276,Make-Lovejoy
Key(Motor End) 18 x 8 x 75 long
Key(Gear box End) 12 x 8 x 75 long
Thruster "Type-ET 275, KG-34, CM-5,
Make-Elektromag"
Motor KW-45, Frame-225M,Rpm-1475
Coupling "Type-Half Rigid/ Half Flexible
Size-60,Make-GBM,RATHI,BIBBY,etc"
Parallel Key 40 x 22 x 185 55C8P35T14
Inter Conn. Shaft Ø200 x 2224 ,IS 1875 55C8 P35 T14
Shims For Motor "74 x 380 x 2Thk 2Nos, 74 x 380 x 1Thk 3Nos
74 x 380 x 0.5Thk 4Nos, 74 x 380 x 0.2Thk 3Nos
74 x 380 x 0.1Thk 4Nos"

Shims For Brake "74 x 380 x 2Thk 2Nos, 74 x 380 x 1Thk 3Nos
74 x 380 x 0.5Thk 4Nos, 74 x 380 x 0.2Thk 3Nos
74 x 380 x 0.1Thk 4Nos"

Spacer(gear box-coupling) Ø80 / 60 x 60 ,IS 2062 Fe410 W B
Torque Arm Arrangment

Torque Arm Plate 685 x 220 x 25
Ultra Bush "Ø160x180, Rubber Mix,Type-0118 802
Make-Freudenberg"
Pin Ø140x300 IS 1871(P-2), 40C8
Washer 10 x Ø170 / Ø112
Split Pin 16 x 140
Cover (Bearing Housing)
Bottom Heat Shield

Heat Shield
Top Cover Assembly

Top Cover
Front Door

Hinge (Front Door)
Cable Arm Assembly
Cable Head
Cable Arm
Cover
Hinge
Cover (Bearing Housing)
Arg. Piping For Lf -1&2
"Hexa head bolt with nut
and Spring Washer" M36 x 120 8.8
"Hexa head bolt with nut
and Spring Washer" M24 x 110 8.8
"Hexa head bolt with nut
and Spring Washer" M20 x 80 8.8
"Hexa head bolt with nut
and Punched Washer" M20 x 55 8.8
"Hexa head bolt with nut
and Spring Washer" M16 x 100 8.8
"Hexa head bolt with nut
and Spring Washer" M16 x 65 8.8
"Hexa head bolt with nut
and Spring Washer" M16 x 45 8.8
"Hexa head bolt with nut
and Spring Washer" M6 x 20 8.8
"Hexa head bolt with nut
and Spring Washer" M12 x 25 8.8
"Hexa head bolt with nut
and Spring Washer" M12 x 20 8.8
Threaded Plug 1/4 inch
But Head Grease Nipple M10 x 1
Sealing Ring Ø280 x 1.5 thk FK3 AS 280 50CrV4
Sealing Ring Ø310 x 1.5 thk FK3 AS 310 50CrV4
Lock Nut KM 34, M170 x 3 DIN 981
Lock Washer MB 34 DIN5406
"Hexa Soc.Head Cap
Screw" M12 x 30 8.8
Split Pin 4 x 18
Split Pin 8 x 45
Punched Washer A16
"Door Hinge & Track
Cleaner(Clevis Pin)" B30-h11 x 85 x 75

Heat Shield (Clevis Pin) B12-c11 x 120 x 114.5
Heat Shield (Split Pin) 3.5 x 25
Long Radius Elbow 90º DN 25 ANSI 16.9 SA234WPB
Quick Release Coupling "FD 45-16 SS
Make-Eaton Or Equi,
Part No-FD 45-1075-16-16"
O-Ring(QRC) Ø33 / Ø26 x 3.5Thk
SS Corrugated Hose 25 NB x 3000 long
Nipple / Adaptor 3/4 inch BSP
Ball Valve 3/4 inch BSP
Socket 1/2 inch BSP
Socket 3/4 inch BSP
Nipple / Adaptor 1/2 inch BSP
Ball Valve 1/2 inch BSP
E CRD
1 coupling - in between Motor & Gear box Make : Love Joy, L110
2 oil for gear box of CRD Indian Oil - Servo gear HP140 / Castrol D140 / BP / syncro L140 / HP ENKLO 320
3 Gear box Type:- Vertical helical with force lub system ,Size : -SDHA 400 , Ratio : - 190.5 : 1 , Make : - santhi
"Pourging hose
3/4"" x 37000mm" Corrugated,Both end straight 3/4" BSP swevel nut with 60º cone,WP-15 Bar, Test Pr-25 Bar.W.Temp-100ºC AISI-304
Motor "Slip Ring Type Stall Torque Motor
Rated Stall Torque-13Nm,3-Ph,50-Hz,1500 rpm(4-Pole),Feame-132, Hp-3,Brake model No-1345 ,Make-Mark Elektriks"
Gear Box "Uptimax Gear Unit
Size-RB3V, HP-4, Ratio-9:1,
Input rpm-0-500, No- 0/ 38 4 6 9"
Coupling Lovejoy L
Drum Spocket t=25.4, z=60
Gear Box sprocket t=25.4, z=21
Chain(Gear box to Drum) 1" 16B1x2500 make:Diamond
Rotary Union "REX Rotary Union
Model- PXUSWA, Size- 25 108"
Adaptor "One end 3/4"" BSP Male and other end
1"" BSP Female fittings"
Cable Reeling Drum "Machine No- 0804312
Make- Electro Zavod."
Preheater(180 Ton. Online)
1 Burner block-7A
2 Pilot burner
3 Blower 30 HP /28" WC
4 H & P unit 30 KW
5 Butter fly valve 200 NB air pipe for main burner
6 Flexible hose pipe 200 NB air pipe for main burner
7 Ball valve 20 NB Oil pipe line for main burner
8 Non return valve 80 NB gas pipe line for main burner
9 Ball valve 80 NB gas pipe line for main burner
10 Solenoid valve 80 NB gas pipe line for main burner
11 Presure switch gas pipe line for main burner
12 Pressure gauge gas pipe line for main burner
13 Pressure regulator 80 NB gas pipe line for main burner
14 Ball valve 40 NB gas pipe line for main burner
15 Solenoid valve 40 NB gas pipe line for main burner
16 Ball valve 15 NB gas pipe line
17 Non return valve 15 NB gas pipe line for pilot burner
18 Gas governor 15 NB gas pipe line for pilot burner
19 safety relief valve 15 NB gas pipe line for pilot burner
20 Solenoid valve 15 NB gas pipe line for pilot burner
21 Micro valve
Preheater(Teeming ladle vertical 180 Ton)
1 Burner block-6A
2 Pilot burner
3 Blower 25 HP /40" WC
4 H & P unit 16 KW
5 Butter fly valve 150 NB air pipe for main burner
6 Flexible hose pipe 150 NB air pipe for main burner
7 Ball valve 20 NB Oil pipe line for main burner
8 Non return valve 80 NB gas pipe line for main burner
9 Ball valve 80 NB gas pipe line for main burner
10 Solenoid valve 80 NB gas pipe line for main burner
11 Presure switch gas pipe line for main burner
12 Pressure gauge gas pipe line for main burner
13 Pressure regulator 80 NB gas pipe line for main burner
14 Ball valve 40 NB gas pipe line for main burner
15 Solenoid valve 40 NB gas pipe line for main burner
16 Ball valve 15 NB gas pipe line
17 Non return valve 15 NB gas pipe line for pilot burner
18 Gas governor 15 NB gas pipe line for pilot burner
19 safety relief valve 15 NB gas pipe line for pilot burner
20 Solenoid valve 15 NB gas pipe line for pilot burner
21 Micro valve-6A
Preheater(Teeming ladle Horizontal 180 Ton)
1 Burner block-7A
2 Pilot burner
3 Blower 50 HP /40" WC
4 H & P unit 30 KW
5 Butter fly valve 200 NB air pipe for main burner
6 Flexible hose pipe 200 NB air pipe for main burner
7 Ball valve 20 NB Oil pipe line for main burner
8 Non return valve 80 NB gas pipe line for main burner
9 Ball valve 80 NB gas pipe line for main burner
10 Solenoid valve 80 NB gas pipe line for main burner
11 Presure switch gas pipe line for main burner
12 Pressure gauge gas pipe line for main burner
13 Pressure regulator 80 NB gas pipe line for main burner
14 Ball valve 40 NB gas pipe line for main burner
15 Solenoid valve 40 NB gas pipe line for main burner
16 Ball valve 15 NB gas pipe line
17 Non return valve 15 NB gas pipe line for pilot burner
18 Gas governor 15 NB gas pipe line for pilot burner
19 safety relief valve 15 NB gas pipe line for pilot burner
20 Solenoid valve 15 NB gas pipe line for pilot burner
21 Micro valve
22 Gear box
23 Motor 3 HP











































Re: sdsds

Posted by dddd, (2011-03-12 09:42:17) /111.93.1.34

Fabulous News! You have been shortlisted to receive a Reward - Reebok Jagger Watch
worth Rs 2999 FREE from Bag It Today.

This free watch has been reserved for you as you have been recently referred by you friend to join Bag It Today.

Shortlisted Entry (User id) :
vipin.manender@gmail.com
Your Reward: A Reebok Jagger Watch
worth Rs 2999 FREE

Your personal link to claim reward: www.bagittoday.com/reward/vipin.manender@gmail.com
(Click to claim your reward)

Just cover our gift delivery, promotion and handling charges of Rs 499.

This reward is being distributed to fortunate few and will be handed over on first come first serve basis.

SEE IF YOUR ONE OF THE LUCKY FEW...

Click to claim your reward

2011 Today Merchandise Private Limited.
Conditions Apply: Actual product may differ from images shown. Offer valid till stocks last.

Re: assistend securty officer in beml india

Posted by nishant, (2011-03-10 23:52:23) /115.241.226.36

sir
ihave appaly for the post of assistend securty officer post. myself postgraduate and having experience of fout yeas in chattisgarh police on subinspector post
i have apply for the seme but still not get any responce from the beml india.

Re: resume

Posted by anamika, (2011-02-10 23:15:01) /210.212.174.177

I am Anamika Kumari i come across the advertisement of the company in NEWS paper I like the profile of company very much and I am passionate to work in the company. please onces go through my resume.


Anamika Kumari

Permanent Address: - D/O- Mr. G.S. Bhakta
Govt. Higher Secondary School Deomali
Dist:-Tirap (Arunachal Pradesh)
Phone NO:-09612679149
Pin no: 786629

Correspondence Address: - SVERI’S College of Engineering, Pandharpur
Gopalpur – Ranjani Road, P.B. no- 64
Gopalpur Pin No. 413304
Dist. – Solapur (Maharashtra)

Mobile: 9766158130/9579162733

E-Mail: kanamika67@gmail.com

Career Objective

To work in a meaningful and challenging position that enables me to develop myself as a professional and permits scope for advancement of the company.

Educational Qualifications

Qualification Institute / College Board / University Year %
B.E.(1) College of Engg. Pandharpur Solapur University 2011 65.13
T.E College of Engg. Pandharpur Solapur university 2010 63.73
S.E. College of Engg. Pandharpur Solapur university 2009 62.27
F.E College of Engg. Pandharpur Solapur university 2008 61.21
HSC Govt.Hr.Sec.School Longding CBSE 2007 69
SSC Govt.Hr.Sec.School Longding CBSE 2005 78

Technical Skills

Languages Known: -
C, C++, Data Structure, VHSIC Hardware Description Language, Matlab
Software known:-
Keil, Proteus, Express PCB, MP Lab



Project work
• Final year Project in EMBEDDED WEB SERVER.
• Mini project in Mobile Burglar Alarm System.

CO-Curricular
• Vocational Training in Embedded Display Driver system from Technix-India.
• Six months training course in C++.
• 1st prize in WITchar-10 Nation Level Event in WIT Solapur.
• 2nd prize in Paper presentation in Versatalia’10 National Level Event in PVG College.
• 2nd prize in trailblazers OLYMPUS’10 National Level Event in COEP.
• Participated in Impetus & concept’10 National Level Technical Symposium in PICT.

Extra Curricular
• Working as a National Service Scheme member.
• Working as an Institution of Electronics and Telecommunication Engineers member.
• Working as an Indian Society of Technical Education member.
• Certified in National Defense Training.
• Participated in basket ball in Zonal match.

Personal Information

Date of Birth : 4th July 1990

Hobbies : To work as social worker.
Making beautiful crafts from various materials.
Writing dairy.

Languages Known : English, Hindi, Marathi, Assamies, Bhojpuri (regional)

Strength
• Strong leadership skills with an ability to motivate teams in achieving common target and goals
• Good communication and interpersonal skills.
• Hardworking
• My parents



Date: …………….. Signature
Place: Pandharpur Anamika kumari

Re:

Posted by Anonymous Guest, (2011-02-09 08:55:47) /117.206.64.15

i'm studying final year eee(BE)...may i for this post

Re: want to settle in public sector

Posted by shakeel, (2011-01-30 12:25:24) /14.96.84.122

MOHD SHAKEEL
Contact No: 9704696542
E mail: shakeel.mhmmd@gmail.com
ADDRESS:
MOHD SHAKEEL
H.No: 2-139,
Arutla (V),
Manchal (M),
Ranga Reddy (D),
Pin 50158
CAREER OBJECTIVE:
To become a good management professional
PROFILE:
• Ability to prioritize delegate tasks and make sound decision.
• Versatile and flexible in nature can adaptable to any organizational changes when protocol demands.
• Holding good communication and public-relation skills and can reciprocate positively towards the work.
TECHNICAL SKILLS:
Software skills:
• Operating systems: Windows VISTA, Linux. Database: MS-Office, DTP
EXPERIENCE:
• Have worked as sales officer in HDFC bank Hyderabad.
• Have four years experience in teaching.
STRENGTHS:
• Honesty, Punctuality, Sincerity, enthusiastic in learning new things carefully and perfectly, accepting criticism, hard working and helping nature.
ACHIEVEMENTS:
• Have achieved first rank and best student award in B.Sc.
• Have achieved School Second Rank in S.S.C.
• Have achieved first prize in essay writing competition in S.S.C
CO-CURRICULAR ACTIVITIES:
• Have worked as school pupil leader in S.S.C.
• Have worked as student organization president in Inter and B.Sc.
• Have worked as “Entertainment Club” president in M.B.A

EDUCATION:
Examination Discipline/Specialization School/ College Board/University Year of pass
M.B.A Marketing And H.R. Nalla Malla Reddy Engg.College J.N.T.U. 2010
B.Sc Life sciences
(B.Z.C) Ibrahim Patan Degree College Osmania University 2005
Intermediate Botany, Zoology, Physics, chemistry Pratibha Junior college Board of Intermediate Education 2001
S.S.C S.S.C Z.P.H.S Arutla Board of Secondary Education 1999
TRAINING AND CERTIFICATIONS:
• Have communication skills training by experts in NMREC in MBA.
• Successfully completed diploma in English in Rama Krishna math Hyderabad.
PERSONAL PROFILE:
Name: Mr Mohd Shakeel
Father’s Name: Mr Shabbeer
Mother’s Name: Mrs Qaisar
Date of birth: 03-08-1983
Sex: Male
Marital status: Unmarried
Nationality: Indian
Hobby: Browsing computer and chatting with friends.
Language proficiency: Telugu, Hindi, English
Permanent Address:
H.No: 2-139,
Arutla (V),
Manchal (M),
Ranga Reddy (D),
Pin 50158
Andhra Pradesh.
DECLARATION:
I here by declare that all the above mentioned information is correct to the best of my knowledge.

Place:
Date: (MOHD SHAKEEL)

Re: Job

Posted by Avinash G, (2011-01-29 16:22:41) /122.166.45.247

RESUME


AVINASH.G
#105, 1st main, 1st cross,
Kothanur, J P nagar 8th phase, PH: 080-26850050, 9886852212
Bangalore-560076 Email ID : avireddy12@yahoo.in

OBJECTIVE

To obtain a challenging and responsible position in the organization and to contribute effectively to the success of the organization and further improve my personal skills.

STRENGTHS

 Ability to handle complex situation in simplified manner.
 Ability and desire to learn and adapt to new technologies.
 To maintain a positive attitude always while with the team and organization.

ACADAMIC CREDENTIALS

COURSE

BRANCH
YEAR OF PASSING
INSTITUTE AGGREGATE PERCENTAGE
Bachelor of Engineering Mechanical Engineering
May 2010 Vemena institute of technology, Bangalore-19
72% FCD
PUC PCMB April 2006 BHSFGC, Jayanagar, Bangalore
52%
SSLC NA March 2004 B.M.E.S, Jayanagar

68%

PROJECT

 Fabrication of solar refrigerator using activated carbon and methanol

DESIGN SOFTWARE KNOWN
 Solid edge
 Catia v5

ACHIEVEMENTS

EXPERIENCE:
Presently working as PRODUCTION ENGINEER in an Mechanical Industry called EXCEL WIRECUT.INC since 6 months. Manufacturer of precision Mechanical Components like Adaptor, Endcap & Piston of an pneumatic actuator for an MNC called FLOWSERVE INDIA PVT LTD, WHITE FIELD, BANGALORE.

PERSONAL DETAILS
PERSONAL INFORMATION:
Name Avinash.G
Father’s name Gopal reddy.R
Date Of Birth 12th October 1988
Languages Known
To speak
To read
To write

English, Telugu, Kannada
English, Kannada, Hindi,
English, Kannada, Hindi

Marital Status Single
Address #105, 1st main, 1st cross, Kothanur, J P nagar 8th phase, Bangalore-560076
Hobbies Playing cricket.
Contact Number: Mobile – 9886852212

DECLARATION:

I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Date:
Place: Bengaluru Avinash.G

Re: looking for Assistant Security Officer

Posted by NARAYANAN.K, (2011-01-10 12:10:48) /59.92.251.192

Sir, My name is Narayanan.K retired from Paramilitary service in the rank of J.C.O during last year 2009 after completion of 23 years service...have passed SSLC from Calicut niversity (Kerala) and ahving one year experiense as a Security supervisor at TYCO fire and Security Film City G.Noida (U.P) and presently working at Hindustan Petrolium Corporation ltd (Bottling Plant) at Kattipalla (Mangalore) as a Security Head Guard
E_mail Karimbannarayanan@yahoo.in
Contact number 09483804544 (Karnataka)
09847012895
Father's name Choolan.K
Address "PRATHYSASA"
Devathiyal Parambil house
Thenhippalam (Post & Village)
Malapuram ( District)
Kerala-673636
Marital Status Married
Height 181 Cms
Language known
English,Hindi,Malayalam,Kannada
Drving license LMV,HPMV.HGMV with badge

I Narayanan.K is hereb by declare that the above mentioned information is true to the best of my knowledge and belief and awaiting for your favorable reply

Thanks & Best Regards
Narayanan.K



Re: Application for the post of Assistant Security Officer

Posted by Santosh Navale, (2011-01-06 13:45:25) /59.164.102.75

I have Completed B.A, & I have 2 years Experince in Clerk & 5 years of expereince in PROGRESSIVE CIVIL CONSTRUCTION CO. (P) LTD, I also done my Diploma in Computer.

kindly contact me on : 9242085689
awaiting for your reply

Re: safetyofficer

Posted by Sudhanshu Kushwaha, (2011-01-04 19:36:41) /27.58.73.176

I am B.sc.&Advance Diploma In Fire Safety Eng. to complet for job to the company ESSAR STEEL LTD. HAZIRA

Re: Job request for any technical post,freshers

Posted by Dibyendu Mondal, (2010-12-28 23:46:05) /110.227.136.251

Dear sir/madam,
I am Diploma in Mechanical engineering,69%,2010.When any job vacancy please contact me.

Thanks...

Re: heavy auto elecritian

Posted by vineshkumars, (2010-12-23 12:52:46) /117.204.104.118

ive been working in a private firm as heavy auto elecrician almost 10 years

Re: CV

Posted by Partha Dey, (2010-11-26 13:58:41) /59.162.204.213

CURRICULUM VITEA
ppdey2@gmail.com
Mobile 9052360946
PARTHA DEY
Career objective

Passion to success in my chosen field through continuous learning and innovation and give value to acquired knowledge by putting strategies for development of self and the organization
Achievements

• Participated in various management meets Astra, Virat.
• Participated in School Quiz.
• Represent our School cricket team as captain.
• Represent our district in U19 cricket tournament.
• Participate in some drawing competition in our home town.

Capabilities
Communication:
• Learned to seek and accept criticism, using this in a positive manner to further build on my skills.
• Understand that good communication is vital to a successful organization


Academic Qualification

• Doing Bachelor of Business Management (BBM) final year from Gayatri Vidya Parishad (Visakhapatnam).
• Passed 10+2 from WBCHSE, West Bengal with an aggregate of 50% in 2008.
• Passed Inter from WBBSE with an aggregate of 50% in 2006.

Projects handled
• 1 month project done in ‘Tata Metaliks Ltd’, Kharagpur, Dist-Midnapur (west) on Employees Motivation.
Technical qualifications
• Package M.S office.
• Data Processing: M.S.DOS.
• Having basic internet concepts.
Hobbies

• Playing cricket
• Watching TV
• Reading my mother tongue novels
• Riding Bike
• Chatting with friends.
• Participating in social activities

Personal Details

Fathers Name : Goutam Dey
Date of Birth : 15-09-1989
Gender : Male
Marital Status : Single
Languages Known: English, Bengali, and Hindi.
Nationality : Indian
Native Place : Inda, Kharagpur.Dist-Midnapur (west).
Address for communication: Partha Dey
c/o Goutam Dey
Inda, Malibagan, PO-Inda.Pin-721305
Kharagpur, Dist-Midnapur (west).


I declare that above furnished information is best of my knowledge and true




PARTHA DEY

Re: job

Posted by ajeesh.k, (2010-11-23 11:58:19) /210.212.236.227

sir iam 6mounth back one application sent for techanician fitter; no replay

Re: MY DREAM CAREER IN BEML

Posted by TIJU S, (2010-11-11 11:01:26) /202.83.56.45

I hav under graduation course in Bachelor of Mathematics (Under Calicut University) I would like to work in your company.Looking for favourable reply from your side,for any suitable posts.
My ADDRESS:TIJU S, S/O KOUSALYA, KURUPPATH HOUSE, KIZHAKKETHARA, KOTTEKKAD(PO), PALAKKAD.PIN-678732, MOBILE NO:9746222604

Re: MY DREAM CAREER IN BEML

Posted by TIJU S, (2010-11-11 10:58:38) /202.83.56.45

I hav under graduation course in Bachelor of Mathematics (Under Calicut University) I would like to work in your company.Looking for favourable reply from your side,for any suitable posts.
My ADDRESS:TIJU S, S/O KOUSALYA, KURUPPATH HOUSE, KIZHAKKETHARA, KOTTEKKAD(PO), PALAKKAD.PIN-678732, MOBILE NO:9746222604

Re: HI good evening sir

Posted by lakshmi pathi.H.V , (2010-10-12 15:42:51) /59.97.33.89

HI sir i'm completing my engg in ece wieh aggre of 62.6 still i'm searching a job if you have any vacancies please mail me

Re: jobs for auto mechanic/instructor & gunman in gujarat

Posted by ADESING BARIA, (2010-09-26 18:29:38) /14.194.45.131

pl.kindly search my various jobs gujarat for above requirements.
my experience is 26 years defence EME (army).suddenly i should be retired in this job.so pl.give me a details of above post.
i have also certificates AUTO TECH PROFICIENCY CERTIFICATE & SECURITY TRAINING CERIFICATE & GRADUATION & ADVANCE COMPUTER COURSE CERTIFICATE. I so far my education is well .pl.give me a chance to the same jobs in gujarat. i fullfill my bio data as per your company.
THANKS & REGARDS,
ADESING M.BARIA (EX.ARMY EME)
(M)9737689892 (GUJARAT)
(M)9638299646 (GUJARAT)

Re: sir,i need a job

Posted by Akash kumar, (2010-09-01 12:49:46) /117.241.242.152

sir,i have completed my diploma in electronics & communication from govt.polytechnic,Bidar. i need a job or training in your beml

Re: aakash_badiger@yahoo.com

Posted by respectd sir,, (2010-09-01 12:44:02) /117.241.242.152

sir,i have completed my diploma in electronics & communication from govt.polytechnic,Bidar. i need a job or training in your beml

Re: I need job for beml

Posted by Shivaraju SL, (2010-08-26 11:49:26) /27.57.39.184

I completed diploma in computer science in SETP Melkote, Mandya Distric, one year technician training in beml bangalore complex. Öne year working in beml erp department i know the hard ware and installation of all kind of software and also lurn sap

Re: 9 Years Experience in electrical maintenance field

Posted by Srihari.V, (2010-08-10 17:07:18) /122.167.54.34

RESUME
Name : Srihari.V
Father's Name : Late Sri K.V.Venkatesha
Date of Birth : 14-05-1975 (35 Years)
Nationality : Indian
Religion : Hindu
Caste : Brahmin (Telugu-Smartha)
Marital Status : Married
Residential Address : # 478, D.Subbaiah Road Chamaraja Mohalla Mysore-570024
Mobile No : 9901424557
Landline No : 0821-2333294
Languages Known : Kannada, English, Hindi & Telugu
Email id : srihari_v53@yahoo.com
srihari_v53@rediffmail.com

Educational Qualification: 1) S.S.L.C-Marimallapa's High School, Mysore. 2) P.U.C (Commerce)-Marimallapa's Junior College, Mysore. 3) Diploma in Electronics & Telecommunication (Course Completed) –Srimath Polytechnic, Mysore
Computer Knowledge: Basics (Word & Excel)
Work Experience:
1) Worked in Neulite Computer Systems, N.R.Mohalla, Mysore.
A Sub Contract Unit for Wipro-e-Pheripharals (Printer Assembly), Hical Magnetics Pvt Ltd (Bangalore)-Transformer Winding

Role: Production Incharge.

Experience: 2 Years.

Responsibility: Taking out the production with Quality and Quantity.

2) Worked in Am-Tech Packs Ltd, Hootagalli Industrial Area, Mysore.
A Can Manufacturing Unit with 100% E.O.U for Beverages.
Role: Senior Technician-Electrical.
Experience: 4 Years+3 Months.
Responsibility: Preventive maintenance of Air Compressors, Diesel Generators. Attending Breakdowns in Compressors, Generators and Press Machines.

3) Worked in Neulite Products Pvt Ltd, Hebbal Industrial Area, Mysore.
A Sub Contract Unit for L&T (Single Phase Digital Meter), Wipro-e-Pheripharals (UPS-PCB Assembly)
Role: Production Supervisor & Electrical Maintenance Incharge.
Experience: 11 Months
Responsibility: Taking out the production with Quality and Quantity, Looking after the Machines like Screen Printing Machines, Pick & Place machine, IC Placement, Reflow Machine.
4) Worked in Vinyas IT Technologies (P) Ltd, Hebbal Industrial Area, Mysore.
A Sub Contract Unit for L&T (Single Phase Digital Meter), BEL etc.

Role: Electrical Maintenance Supervisor.
Experience: 2 years.
Responsibility: Preventive maintenance of Machines like Screen Printing, Pick & Place Machine, IC Placement, Reflow, Air Compressor, Diesel Generators, Wave Soldering.

Re: Hello Sir/Madam, want a job in your company

Posted by Ashok Kumar, (2010-07-25 19:10:56) /117.254.137.8

CURRICULUM VITAE

ASHOK KUMAR. S
Mobile: 9789674597
Department of Engineering: Mechanical Engineering Email ID: ashok4ru@gmail.com


PROFILE:

 Over 1Year of experience in NDT (ASNT Level II).
 Technical Skill set as follows, Auto cad, Pro-E, Quality Control Tools.
 Good knowledge in Codes & Standards like SA388, ASME Sec-V Articles, used for PT/MT/UT.
 Result oriented analytical and conceptual skill, highly motivated and driven team player, Eager to learn new technologies, Honesty, Hardworking, and Believes in deserve than desire.


WORK EXPERIENCE:

Organization : Bit techno crafts, Coimbatore, Tamilnadu.
Designation : Engineer (Quality).
Responsibilities:
 Inspection of the job using NDT methods.
 Good knowledge in Ultrasonic examination of different components.
 Good knowledge in Penetrating Examination of casting.
 Good knowledge in Magnetic Particle and Ultrasonic Examination Knowledge in Safety devices.
 Knowledge in Gauges.
 Handled Ultrasonic testing Equipments such as PX10.
 Documents preparation and maintenance for the Ultrasonic testing of welded joints in pipes.
 Maintaining the equipment history.

INPLANT TRAINING:
Duration : From 15th of June 2006 to 15th of July 2006
Place : FM Yard Mines-I, Neyveli Lignite Corporation, Tamilnadu.
Details : Prepared report on the Mining Machinery and Equipments.



EDUCATIONAL QUALIFICATION:



EDUCATION
BOARD/
UNIVERSITY
INSTITUTE
YEAR OF PASSING
PERCENTAGE OF MARKS

B.E.
(Mechanical Engineering)
Anna University
Vel Tech Engineering College, Chennai
2009
71

12th (HSC)
State Board Jawahar Matric. Hr.Sec. School, Neyveli
2004
80

10th (SSLC)
Matriculation Jawahar Matric. Hr.Sec. School, Neyveli
2002
82


ACADEMIC PROJECT:
Title : ANTICOLLISION DEVICE FOR OFF ROAD VEHICLE
Division : Chennai
Team Size : 4
Duration : 4 Months
Description :
The device used to detect any obstacles behind the vehicle while coming in reverse direction in order to avoid collision very safety device for future vehicles. Detecting an obstacle is a tough task because for an automobile, only while it is in motion, the anti-collision system should detect for obstacles. The safe distance at which an obstacle can be present, should be calculated.
Apart from this, the angle at which the obstacle is present and the direction of travel of the vehicle are important to detect the real obstacle. In the event of detecting an obstacle the system should given an alarm or warning and stop the vehicle.


OTHER SKILLS:
Technical Skills:
 Knowledge on Catia
 Knowledge on ANSYS

Computer Proficiency:
 Operating System : Windows Family
 Packages : Microsoft Office

PERSONAL DETAILS:

Father’s Name : Mr.A.Selvaraj
Date of Birth : 06 - 03 – 1987
Age : 22 Years
Languages Known : English, Tamil, and Hindi.
Hobbies : Listening to the Music, Reading Books
Address : C-21, Thiru vi ka Street
Block-25, Neyveli
Cuddalore – 123401
Tamilnadu

Declaration:
I hereby declare that all the details furnished above are true and unbiased.

Place: Bangalore
Date: (ASHOK KUMAR.S)

Re: Mechanical

Posted by Mahesh.S, (2010-07-20 12:10:23) /122.167.153.194

RESUME

Mahesh S
#220, E.W.S,Hebbal 3rd stage, Subramanyanagar,
Mysore 570016
Mobile: 9964886795
Mail ID: Maheshgowda.S89@gmail.com




Objective:

Seeking a position in an esteemed organization that provides environment for growth, continuous learning and skillful application of my knowledge.


Education:

Degree Certifying Authority Aggregate Percentage Year of passing

BE
(Mechanical)
Visvesvaraya Technological University
74.19%

2010
II PUC
Pre University Board

60.66% 2006
SSLC
Secondary Education Board
59.36% 2004

Software Skills:

• Ansys V11
• Mastercam X3
• Solid edge V19







Projects Undertaken:
I have carried out a project in B.E named “Design of Quenching fixture”. The gears after manufacturing are subjected to carburizing, hardening to improve the hardness. After hardening process gears are subjected to rapid cooling called quenching. In quenching the oil circulated throughout the surface of gear tooth in order to achieve required hardness.
It is found that circulation of oil throughout the bottom face is difficult and also bottom face of the gear is first come in contact with the quenching oil and later the oil is circulate to the other faces of the gear. This results in uneven grain growth throughout the structure. Hence it is necessary to modify the design so that oil should splash in a manner such that it will surround the gear at a time and also uniform oil circulation throughout the gear.
By improving the design of the fixture so that it can accommodate maximum load gear wheels (more than 10tonne).Fixtures are subjected to repeated loading and unloading cycles, this induces residual stresses and hence decreases the life. In order to improve life of the fixture, selecting a suitable metal which is having high strength and less cost than mild steel (presently using).
Finally optimize the cost of the proposed quenching fixture design.

Achievements:

• Topper in 3 semester out of 8 semesters in the class and once in the college .


Papers presented:

• Presented paper on “Advance systems in two wheelers”, Indian society for technical education, HMSIT,Tumkur on 30th of April 2010





Co-Curricular:

• Actively participated in “EKALAVYA 08”, national level technical fest held at Bahubali College of Engineering from 28th to 30th march 08
• Co-ordinated paper presentation and poster presentation competitions organized by ISTE students chapter, Bahubali college of Engineering

Volunteered:

• Social services at NSS camp held at college
• Donated blood at a camp organized by Indian Red Cross Society

Hobbies:

• Meditating
• Gardening


Languages known:

• English
• Kannada


I declare that, the information provided above is true to the best of my knowledge and belief.



Date: 20-07-2010
Place: Mysore Mahesh S

Re: i need job in BEML limited.

Posted by vinuthashree.s, (2010-07-20 11:39:15) /175.40.213.123

I have completed my engineering degree in 2010 in electronics and communication.
i am still searching for a job in any stream in any company.i guareenty that i do my best in any company i work.
RESUME
VINUTHASHREE.S
C/o Narasimhaiah
Behind vishwa shanthi ashram bus stop
Arishinakuntai post
Nelmangla
Bangalore
vinutha.1407@gmail.com
Mobile: 9663929620

CAREER OBJECTIVE
To pursue in an organization, which provides an opportunity to establish my potential in full fledge for the growth of the organization and self.
ACADEMIC INFORMATION

Graduation: Bachelor of Engineering.
Specialization: Electronics & Communication
University: VTU Belgaum
Aggregate Percentage: 54.3%
Year of passing: 2010

Pre University Course: SARVODAYA P.U.College, Tumkur.
Percentage: 66.66%
Passing Year: 2005

S.S.L.C:
School: S.S.R.H.S.S, Tumkur.
Percentage: 87.52%.
Year of passing: 2010

TECHNICAL SKILLS

• Programming Languages: C, Linux.
• Application Suites: MS-Office.

PROJECT DETAILS

Project title: Embedded Widget Design Implementation of TCP/IP Micro Stack for Real-Time Industrial Constraints Monitoring and Control.
Description: In this project we designed the web server circuit board to control the devices or equipment’s from the remote place through a web page. Here all devices are connected to the microcontroller and the devices which are to be controlled are connected to the relays on the web server circuit board. The web-server circuit is connected to LAN or Internet. The client or a person on the PC is also connected to same LAN or Internet. By typing the IP-address of LAN on the web browser, the user gets a web page on screen; this page contains all the information about the status of the devices. The user can also control the devices interfaced to the web server by pressing a button provided in the web page.

PERSONAL AND CONTACT DETAILS

Full Name: Vinuthashree.S
Date of Birth: 14 JULY 1987
Father’s name: Siddaiah.R
Mother’s name: Chandramani
Marital status: single
Languages known: English, Kannada.
Permanent Address: D/o Siddaiah.R
#199 3rd Cross
C.M.Extn. Kyathasandra.
Tumkur-572104
Karnataka.
Contact Details: 9663929620, 9738655475.


I hereby declare that the above-mentioned information is true to the best of my knowledge.


Date: Regards
Place:

(Vinuthashree.S)

Re: iam like to work with ur company

Posted by rittodas thalakkottukara , (2010-07-16 21:44:24) /117.204.102.99

iam in diploma civil engg holder 10 year experience in the feild my address
rittodas thalakkottukara
thalakkottukara house ,
vadadkkethara ,
pudussery,po
palakkad 678623
ph;mob- 9447422802
res491-2566707

Re: for a job

Posted by THUSHAL, (2010-07-06 16:38:51) /111.92.37.69

I am a mechanical engineering diploma holder from Technical board of examination. and also have the diploma in safety engineering, I trying to get a new job in BEML.
now i am working in abroad (abudhabi)
My address : THUSHAL.TU
SREEVALSAM,
MUTTAPALAM (P.O)
THACHODE,
VARKALA,
TRIVANDRUM.695145
ph :04702606914

Re: I wante Application For Jobs

Posted by venugopal.M.S, (2010-07-06 14:56:39) /122.166.47.132

Sir please send my mail application for bemal jobs
Thanking you,

Re: Job Application

Posted by Samna Beagum A, (2010-07-05 15:57:55) /61.1.225.106

Sir,
I have compleated my b.tech in electrical and electronics enggineering under M.G University with an aggrigate of 73.8%(up to 7th sim),and 8th sem result is coming within one month.If there is any vacancy please inform me.

Re: job in beml

Posted by babitha t v, (2010-07-02 15:52:11) /61.2.196.101

respected sir,
i have compleated my b tech in electronics and commmunication enggineering under cusat with an aggrigate of 67.3%.if there is any vacancy please inform me.

Re: safety officer job

Posted by ANOOP.CS, (2010-07-01 12:28:19) /117.204.96.230

i am passed in fire& safety
anoop.c
s/o chandran.k
panchajayam(ho)
kayaramkulam
thenkurissi
palakkad
kerala
pin 678671
mob:-9809249435,9746679767 begin_of_the_skype_highlighting              9746679767      end_of_the_skype_highlighting

Re: seeking for the post of a safety oficer

Posted by Amith Issac Saldanha, (2010-06-27 18:39:17) /61.1.132.155

Respected Sir,
I am a fire and safety engineering diploma holder from mysore and also with the diploma certificate i have also undergone practical training in fire fighting and fire prevention at banglore and also i have undergone training in first aid with govt certificate ...
sir am well pleasing to work in your esteemed institution called BEML. if any vacancy for the post of safety officer please contact me...
cell no; 9481168881 Res no: 0821-2402983

Re: Application for iob.

Posted by Aiswarya.V.T, (2010-06-19 14:11:38) /59.93.2.239

Respected sir,
I hav completed under graduation course in Bachelor of Computer Application in 2010(under Bharathiyar University).I'm quite fluent in languages(Hindi,English,Malayalam,Tamil).I would like to work in your company.Looking for favourable reply from your side,for any suitable posts.
address:Aiswarya.V.T.
Thanikkkal House,
Theake Thara,Pudusseri,
Palakkad,Kerale.
pin-678623.
ph:0491-2567229,mob:9048424499.

Re: application for the post of mechanic

Posted by binu velayudhan, (2010-06-19 13:17:09) /78.89.50.0

i have done iti in mechanic motor vehicle and currently working as a hydraulic mechanic in kuwait defence for last 8 years if any kind of requirement in his company pls mail me binucsa@yahoo.com phone india 9946785030 kuwait 00965 99292432

Re: graduate-fresher

Posted by ramprasadh, (2010-06-18 18:14:57) /117.254.153.247

i completed my engineering in electrical and electronics .im a 2010 passed out.i reside in chekkanthara palakkad.im eagerly looking forward to work in beml palakkad.

Re: Application for field service engineer

Posted by Yathish G I, (2010-06-16 20:19:13) /59.99.64.42

Dear sir
im Yathisha i want field service engineer job in hydraulic side

Re: Application for suitable Job

Posted by Naveen kumar.K.P, (2010-06-13 20:06:01) /112.110.27.170

NAVEEN KUMAR.K.P.

naveen.imbit@gmail.com







s/o K.Purushotham,

Kodlahalli,Koratagere(taluk),

Tumkur(district),Pin:572121,

Phone(M):9743644371

________________________________________________________________________







OBJECTIVE:



Seeking to work in a professionally stimulating environment ,which can give me the opportunity to exploit my creative and technical skills.



ACADEMIC PERFORMANCE:



Graduation:Bachelor of Engineering.



Branch :Industrial Engineering and Management



Semester
Percentage
Average
College
University

1st
55.10%
59.84%
Bangalore Institute of Technology
Visweswaraya Technological University

2nd
60.13%

3rd
55.44%

4th
54.44%

5th
53.67%

6th
59.89%

7th
80.22%

Course
Institution
Aggregate

10th standard
Jawahar navodaya vidyalaya
65.80%



12th standard
sree siddaganga PU college for Boys
54.66%

















TECHNICAL SKILLS:



Language Known : C-Programming.

CAD/CAM Softwares : Autocad,Solid edge,CNC train.

Simulation software : Witness

ERP Software : Sixth sense,Lindo.



OTHER ACHIEVEMENTS:



● Member of Mechanical Engineers Association,Chennai.



● Participated in COLLOQUIUM on prospects in Project Management and infrastructure

Development conducted by SCHOOL OF MANAGEMENT FOR INFRASTUCTURE

AND DEVELOPMENT STRATEGIES-INDIA.





HOBBIES:

●Watching movies and listening to music.

●Sports like Cricket,Football,Voleyball,Tabletennis,chess.

●Reading Books.



PERSONAL PROFILE:



Name : Naveenkumar.K.P.



Father’s Name : Purushotham.



Nationality : Indian.



Date of Birth : 6th may 1989.



Languages Known : English,Hindi,Kannada,Telugu.



DECLARATION:

I here by declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of above mentioned particulars.







PLACE : Bangalore

DATE : 26/3/2010 Naveenkumar.K.P.





NAVEEN KUMAR.K.P.

naveen.imbit@gmail.com







s/o K.Purushotham,

Kodlahalli,Koratagere(taluk),

Tumkur(district),Pin:572121,

Phone(M):9743644371

________________________________________________________________________







OBJECTIVE:



Seeking to work in a professionally stimulating environment ,which can give me the opportunity to exploit my creative and technical skills.



ACADEMIC PERFORMANCE:



Graduation:Bachelor of Engineering.



Branch :Industrial Engineering and Management



Semester
Percentage
Average
College
University

1st
55.10%
59.84%
Bangalore Institute of Technology
Visweswaraya Technological University

2nd
60.13%

3rd
55.44%

4th
54.44%

5th
53.67%

6th
59.89%

7th
80.22%

Course
Institution
Aggregate

10th standard
Jawahar navodaya vidyalaya
65.80%



12th standard
sree siddaganga PU college for Boys
54.66%

















TECHNICAL SKILLS:



Language Known : C-Programming.

CAD/CAM Softwares : Autocad,Solid edge,CNC train.

Simulation software : Witness

ERP Software : Sixth sense,Lindo.



OTHER ACHIEVEMENTS:



● Member of Mechanical Engineers Association,Chennai.



● Participated in COLLOQUIUM on prospects in Project Management and infrastructure

Development conducted by SCHOOL OF MANAGEMENT FOR INFRASTUCTURE

AND DEVELOPMENT STRATEGIES-INDIA.





HOBBIES:

●Watching movies and listening to music.

●Sports like Cricket,Football,Voleyball,Tabletennis,chess.

●Reading Books.



PERSONAL PROFILE:



Name : Naveenkumar.K.P.



Father’s Name : Purushotham.



Nationality : Indian.



Date of Birth : 6th may 1989.



Languages Known : English,Hindi,Kannada,Telugu.



DECLARATION:

I here by declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of above mentioned particulars.







PLACE : Bangalore

DATE : 26/3/2010 Naveenkumar.K.P.



















Re: Re:Application For Job

Posted by ubaid.kp, (2010-06-11 18:43:12) /175.40.151.67

respected sir,
I am a ITI holder in mechanic motor vehicle ,(APprantiship)Pleasse let me know if there is any suitable vaccancy
Address,Ubaid .kp
Kundilpeedikayil ,s.r.k nagar,ottapalam ,palapuram(p.o),palakkad _7293937037

Re: result for technical at march batch

Posted by manjunath ug, (2010-06-11 12:45:20) /59.90.166.69

respected sir
i was attend the selection interview called fm your kerala complex seen march batch but no any reply will come to my interview sir.so i request you pls kindly send my result to above id please sir details.MANJUNATH UG S\O GIDDEGOWDA.APPLICATIOM NO:-13
sir please kindly refer my application no send my resut please.
i shell ever great ful for your act of kindness.
thanking you sir.

Re: request for a suitable job in beml

Posted by SIVARAMANKUTTY AV, (2010-06-11 12:15:46) /117.204.101.191

I retired from Army wef 31 Dec 2009. am seeking a suitable job in BEML Palakkad. I enrolled in the Army as a clerk and retired as Office Supdt. I am well experienced in administrative matters. If any such vacancy falls please have a call. My tele No is 2570660, Mobile (9744996099)

Re: Job request

Posted by Sarath Panikkassery, (2010-06-10 17:47:15) /202.164.150.36

sir, I am an NTTF toolmaker with 5 years experience with additional qualification of CAD/CAM with one year experience. Please let me know if there is any suitable vaccancy.

Re:

Posted by RAJESH.R, (2010-06-08 16:10:21) /59.93.5.84

HI I AM RAJESH I WANT TO JOB IN BEML,MY QUALIFICATION IS BBA(DEGREE)TALLY, MY ADDRESS
RAJESH
S/O RAJAN
RAJESH BHAVAN
NILAYATHIRY
PUDUSSERY (PO)
PALAKKAD
KERALA
PIN 678623
PHONE NO 9995889616,9847846059

Re: JOB

Posted by ANISHKUMAR.M, (2010-06-08 16:00:44) /59.93.5.84

HI I AM ANISH,I WANT THE JOB IN BEML,MY QUALIFICATION IS BBA(DEGREE),AND KNOW THE COMPUTER APPLICATION MY ADDRESS
ANISHKUMAR.M
S/O MUNIYAPPAN
OMAYAMPALLAM
VENGODI (PO)
ELAPPULLY,PALAKKAD
KERALA PIN 678622
PHONE NO 9288162164,9388537422

Re: Application for job

Posted by Shijin K Mathew, (2010-06-02 19:46:22) /110.225.42.43

Respected Sir,
I'm SHIJIN K MATHEW. I'm a FIRE & SAFETY ENGINEERING DIPLOMA HOLDER ALONG WITH OSHA, US DEPARTMENT of LABOUR.I have 1 YEAR EXPERIENCE IN DRDO(Ministery of Defence),ORRISA and 2 YEARS EXPERIENCE in AHLUWALIA CONTRACTS INDIA PVT LTD,BANGALORE.I'm very much interested in joining BEML iN PALAKKAD DIVISION. If any recruitment please INFORM ME ON
SHIJIN K MATHEW,KALATHIKATTIL HOUSE, PUTHANUR P O, MUNDUR, PALAKKAD.
PH: 0491-2832712 MOB: 9995793950

Re: Application for job

Posted by Rijo Vargheese, (2010-06-02 19:32:41) /110.225.42.43

Respected Sir,
I'm RIJO VARGHEESE.I'm a CIVIL ENGINEERING DIPLOMA(2 YEARS)along with AutoCAD.I have 3 YEARS EXPERIENCE in AHLUWALIA CONTRACTS INDIA PVT LTD, BANGALORE.I have ASNT LEVEL II certificate and 1 YEAR experience in RELIANCE OIL & GAS under J & K ENGINEERING CONTRACTS CO.,GUJARAT as SITE SUPERVISOR.I'm very much interested in joining the BEML in PALAKKAD DIVISION.If any recruitment please inform me on,
RIJO VARGHEESE, AZHANTHARA HOUSE, MUNDUR P O, PALAKKAD.
PH :0491-2832321 MOB:9895466121

Re: Application for suitable job

Posted by BIJITHA, (2010-06-01 16:39:21) /220.225.200.167

sir
I am a Diploma holder in instrument technology applying for a suitable post in your organistion and
now i am working in Patspin India Ltd Palakkad in production department.


Address
BIJITHA C
Puthilath House
Vazhavakode
Pattanchery PO
palakkad -678532





Re: job...

Posted by jayalakshmi c, (2010-06-01 13:34:40) /59.163.88.180

hi, i'm jayalakshmi. i have completed be in ece(electronics and communication) in 2009. i'm searching for a job. if you have any openings plesae mail me.

Re: Job application for the post Stores Executive / In-charge.

Posted by Manoj.A, (2010-05-27 17:21:41) /202.83.56.152

I am Manoj, aged 30 yrs - a graduate having 9 years of work experience in Stores and residing at Palakkad would like to apply for a suitable post in the Materials department in your esteemed organization.


Qualification : BA -History, Philosophy, Sanskrit (Triple Main), from Sree Sankaracharya University of Sanskrit, Kalady.

 DCA (Diploma in Computer Application) – MS Word, MS Excel, Internet & Basis about Computer

Re: HI GOOD EVENING SIR

Posted by sridevi.chintala, (2010-05-23 18:13:48) /121.246.144.241

Sir
I am Sridevi.Chintala completed B.Com(GENERAL)(M.B.A)Finance& Marketing .In GITAM COLLEGE VIZAG i know( m.s office &tally.)I am in search of a good job .any job vecancy please send to my mail id.I have alredy sent my C.V.resume SO Please be kind to consider my request.Hopping for the best.

Re:

Posted by sridevi.chintala, (2010-05-23 18:11:00) /121.246.144.241

Sir
I am Sridevi.Chintala completed B.Com(GENERAL)(M.B.A)Finance& Marketing .i know( m.s office &tally.)I am in search of a good job .any job vecancy please send to my mail id.I have alredy sent my C.V.resume SO Please be kind to consider my request.Hopping for the best.

Re: resuma

Posted by unnikrishnan, (2010-05-22 14:08:33) /202.83.56.9

I want a job in BEML.My qualification-sslc passed,have experience in plumbing work (12 years)
My address : unnikrishnan.m
vallekulam,
pallatheri
palakkad-678007
ph : 9840084891

Re: Job request

Posted by JASEEM B, (2010-05-22 09:01:37) /202.88.254.144

Sir,
I am an engineering (Electrical & Electronics) graduate and I am in search of a good job. Now i am working with KSEB(KERALA STATE ELECTRICITY BOARD, PALAKKAD) for last 8months on contract basis. I have already sent my CV and resume. So please be kind to consider my request. Hoping for the best.

Re: job requirement

Posted by PREETHA M, (2010-05-19 16:45:16) /202.83.56.185

sir
I am a Pree degree under calicut university, dipolma shorthand & typing lower and higher, computer MS office . I will trying to apply for a new job in BEML.
now i am working in idea office palakkad (data entry work one year experience),any job vacancy pleas contact my address : PREETHA M, W/O UNNIKRISHNAN, VALLEKULAM, PALLATHERI(PO), PALAKKAD-678007

Re: MY CAREER IN BEML

Posted by TIJU S, (2010-05-18 17:54:32) /202.83.56.57

sir
I am a B.Sc mathematics degree under Calicut University. I will trying to apply for a new job in BEML.
now i am working in hdfc bank,any job vacancy pleas contact my address :TIJU S, S/O KOUSALYA, KURUPPATH HOUSE, KIZHAKKETHARA, KOTTEKKAD(PO), PALAKKAD-678732,MOBIL NO:9746222604

Re: Interest to work in hometown

Posted by HR & ADMINISTRATION, (2010-05-17 19:00:37) /57.73.7.145

iAM BSC GRADUATE WITH MBA IN HRA & MARKETTING
WORKING IN LOGISTICS/FREIGHT FORWARDING INDUSTRY AS SENIOR EXECUTIVE AIR FREIGHTS. LIKES TO JOIN WITH BEML

Re: Suitable post in BEML, Kanjikode

Posted by Rajagopalan S, (2010-05-16 16:15:47) /115.240.175.33

I'm very happy to know that BEML in palakkad. I serving in Indian Army (EME)and will become Ex-serviceman on this year last after 20 Yaers service. I am a Diploma holder in Electonis & Computer Engg (with good experience in Networking & Compueter hardware). Really I pressure to work in Beml, I'm residing at Pudussery, Palakkad. I hope i get a job in suitable post.

Re: resume for suitable post

Posted by Bishwanath Chakraborty, (2010-04-17 11:39:06) /59.94.79.102

I am a mechanical engineering diploma holder from Technical board of examination.I will trying to apply for a new job in BEML.
now i am working in Shiv Vani oil & gas Exploration Service ltd.from 2005 to till now.

Re: training after job

Posted by Antony jijenth, (2010-04-14 22:21:07) /122.164.184.136

I am hearing impaired. i am doind BCA(computer application) final year in SRM university, chennai. i just finish BCA on june. i want to training after job in BEML company.. address: G.stanly, 17/34 kizha street , idindhakarai, tirunelveli-627104. mobile:9884536529(sms only)

Re: appilcation for job

Posted by subhakanta samanta, (2010-04-10 09:58:56) /117.97.123.152

i want fitter,Qc and degening jobs

Re: about written test

Posted by PRASHAN THI, (2010-04-03 13:59:26) /121.246.91.226

i didnt got call letter for written exam

Re: application for job

Posted by santosh kumar srivastava, (2010-04-01 19:58:22) /117.241.144.241

We regards to say that.Your advertisment

comesin The Times Of India on 31March2010.My qualification B.Com.Currently working in J.P Cement at post S.R. My mobile no-09795619893





Re: request for job

Posted by Dinesh.S, (2010-04-01 17:28:38) /117.204.98.49

I'm currently pursuing final year B.Sc computer science. I would like to know about the job opportunities of your company that fits my eligibility.

Re: job requirement

Posted by amalraj.i, (2010-03-30 01:56:54) /203.197.143.150

sir,
I have 3 years experiance in L&T .Ihave intrest to join in BEML palakkad division.I done in DME Mechanical Engg.IF any requirement is there pls inform me.
174/2,ozyar house,iyyerkalam,thomayar st,kozhippara(po),palakkad-678557,kerala.cell no:8144706380.

Re: post applied for parts champion

Posted by virender singh rawat, (2010-03-29 14:34:07) /122.160.68.149

sir,

i have done diploma in mechanical engg and currently working a&a eartmovers sole dealer of j.c.b as a spare parts division my hand experience for this line is 6 year if any kind of requirement in his office pls mail me i am physically challlange person

Re: i want to fitter job

Posted by bidhan bera, (2010-03-24 13:48:56) /59.93.247.132

i want to a fitter/ QC/ tool& die making job

Re: job

Posted by suresh babu, (2010-03-12 17:12:18) /122.167.193.154

HI,
I complited B.E(EEE).2009 passed out fresher .I dont have any experiance.I want join you are company if any recruitment please inform me .Thanking you
email:sureeshsha@gmail.com
Mobile no:9945248589

Re: JOB

Posted by NIRAJ P.MOHITE, (2010-03-12 16:45:23) /59.99.59.31

SIR I WANT SPARES PARTS JOB my no 09970305664

Re: Application for any suitable post

Posted by sheeba josphine r, (2010-02-23 15:38:11) /117.242.68.234

I want a job in BEML. My qualification - Diploma in computer technology from state board of technical education,tamilnadu.,BCA(madurai kamaraj distance education).,MCA(annamalai university distance education)
Address
sheeba josphine r
d/o late.ravelswamy
ex serviceman
kanjikode po
palakkad dt- 678 621

Re: Application for any suitable post

Posted by Fransis M, (2010-02-23 15:32:28) /117.242.68.234

I want a job in BEML.My qualification-sslc failed,have experience in driving light motor vehicle(9 years), heavy motor vehicle(4 years)
My address : Fransis M
narrayan house
K N pudur
kanjikode,palakkad,kerala
ph : 09446975347

Re:

Posted by Noname Guest, (2010-02-18 15:16:46) /202.89.74.139

I am a mechanical engineering diploma holder from Technical board of examination.I will trying to apply for a new job in BEML.
my name is gnanasunder from vandavasi

Re: Searching for reputed company's job

Posted by SAJAI.S, (2010-02-12 13:41:59) /122.172.106.11

Marketing and Finance specialization in MBA,1 Year experience in marketing,for a three star hotel in Banglore.

Re: mechanical engineering diploma

Posted by Jithesh.t, (2010-02-09 13:03:27) /117.204.96.45

I am a mechanical engineering diploma holder from Technical board of examination.I will trying to apply for a new job in BEML.

Re: B-TECH (ECE)

Posted by G.Santhosh, (2010-01-28 10:32:02) /117.254.119.18

I Will traing to apply for anew job in bemlindia.com

Re: I need a good job in a good company

Posted by N.Shashikala, (2010-01-27 12:23:17) /59.97.57.56

Good Reply from you

Re: be mechanical

Posted by siddareddy, (2010-01-20 12:09:36) /122.167.9.134

hi this is siddareddy

Re: Application for job

Posted by REVATHI.S, (2009-12-12 12:42:58) /125.17.164.241

I ve completed my B.E(Information science)

Re: Application to the job

Posted by MARUTI SHAHAPURKAR, (2009-11-14 18:27:32) /59.92.252.180

HI I AM MARUTI SHAHAPURKAR
H NO:-746 SHIVAJI GALLI AT POST KADOLI
TAL/DIST BELGAUM
PIN:-591143
PH NO:-80506764
I WANT JOB IN YOUR BEML

Re: Waititng 4 result

Posted by hero, (2009-10-16 08:25:41) /

waiting 4 interview results...........waiting 4 final results ....after giving interview....

Re: wats cut off

Posted by t4-trix, (2009-09-13 11:24:53) /

they kept very high cut off it seems,i have 71.6% and in their website i was not short listed

Re: computer

Posted by manju k.v, (2009-08-17 11:08:56) /

hardware and networking job.

Re: job

Posted by b.tech(et&c), (2009-08-04 13:02:19) /

iwan agood job

Post a Reply